Search the Wisconsin Historical Society's collections
Filter: Categories of Wisconsin Historical Images
Filter: Subject of Metal trade
Filter: Subject of metal industry
| Date: | 08 08 1973 |
|---|---|
| Description: | Original Falk caption reads, "These pictures of machine number 7409 for Jack Blank to use as illustration of a Falk slotter to gain approval to use a simil... |
| Date: | 08 14 1973 |
|---|---|
| Description: | View of a lip ring casting that is a component of a basic oxygen furnace. This particular unit was purchased by Chicago Bridge and Iron of Greenville, Penn... |
| Date: | 08 20 1973 |
|---|---|
| Description: | View of a combination reducer/pinion that is a component of a roughing mill for steel. This unit was purchased and used by the Eastern Carolina Steel Divis... |
| Date: | 01 11 1974 |
|---|---|
| Description: | Type M non-reversing gear that is a later component of a tuna boat. This unit was purchased by EMD and used by Tacoma Boat. Original Falk caption reads, "N... |
| Date: | 01 11 1974 |
|---|---|
| Description: | Non-reversing marine reduction gear that was later purchased and used by Zapata for an offshore oil drilling service boat. Falk caption reads, "Nameplate r... |
| Date: | 02 19 1974 |
|---|---|
| Description: | Kiln component that was purchased by F.L. Smidth and used by Dundee Cement Company of Clarksville Missouri. Falk caption reads, "1029-A46 copied by Bracket... |
| Date: | 03 13 1974 |
|---|---|
| Description: | View of a gear test at Falk that is done to "show parallel alignment of hubs with unequal diameters."- according to original Falk caption. |
| Date: | 03 28 1974 |
|---|---|
| Description: | Original Falk caption reads, "This photo taken to illustrate pre-heating a large coupling hub by torch prior to making a shrink-fit mounting on a shaft." M... |
| Date: | 05 22 1974 |
|---|---|
| Description: | Original Falk caption reads, "These pictures taken to illustrate a procedure to allow saving and reusing Tivela lube during service or repair operations on... |
| Date: | 06 28 1974 |
|---|---|
| Description: | Reverse drive that was purchased by Delaval Turbine and used by Bulk Food Carrier. Falk caption reads, "Largest of the "MR" type design made to date. Wides... |
| Date: | 03 31 1905 |
|---|---|
| Description: | An unidentified Falk employee stands next to a large Steel Spur Gear. The sign in the photograph reads: "Cast Steel Spur Gear. Made by The Falk Co. Milwauk... |
| Date: | 07 15 1974 |
|---|---|
| Description: | Gear coupling that was purchased by A.G McKee and Company and used by Fior De Venezuela of South America. Falk caption reads, "Iron ore briquette roll driv... |
| Date: | 08 19 1974 |
|---|---|
| Description: | This unit was purchased and used by Armstrong Rubber Company. Original Falk caption reads, "Design horsepower-3143; service horsepower-1500; service factor... |
| Date: | 08 19 1974 |
|---|---|
| Description: | This unit was purchased and used by Armstrong Rubber Company. Original Falk caption reads, "Design horsepower-3143; service horsepower-1500; service factor... |
| Date: | 08 31 1974 |
|---|---|
| Description: | Twin pinion marine red gear that was used by The Offshore Company for the Discoverer 534, a deep ocean drilling rig. Original Falk caption reads, "Propulsi... |
| Date: | 08 31 1974 |
|---|---|
| Description: | Twin pinion marine red gear that was used by The Offshore Company for the Discoverer 534, a deep ocean drilling rig. Original Falk caption reads, "Propulsi... |
| Date: | 09 27 1974 |
|---|---|
| Description: | View of machinery castings that were a later component of a cement mill support roller. This unit was purchased by the Fuller Company and and used by Huron... |
| Date: | 10 18 1974 |
|---|---|
| Description: | Overhead view of a mixing fermenter that was later purchased by the Mixing Equipment Company Incorporated and used by Italproteine of Sardinia, Italy. Orig... |
| Date: | 10 1974 |
|---|---|
| Description: | Fluid power drive that was a later component of a sugar crusher drive. This unit was purchased by Voorhies Supply and used by Glenwood Sugar Cooperative. O... |
| Date: | 02 15 1975 |
|---|---|
| Description: | View of a YBX product cut that was used on a vertical roller mill. This product was later purchased by Allis Chalmers Corporation and used by Kaiser Longho... |
If you didn't find the material you searched for, our Library Reference Staff can help.
Call our reference desk at 608-264-6535 or email us at: