Date: | 02 14 1957 |
---|---|
Description: | A male employee stands near a screw press washer. The speed reducer shown is a Right Angle, Double Red. Later purchased and used by the American Boxboard C... |
Date: | 03 13 1957 |
---|---|
Description: | Described by the orginial Falk caption with "91 teeth, .77039 DP, 12 inch Face Meshes with 15 tooth pinion. Gear is shown on Drawing 317096 and Pinion on 2... |
Date: | 04 03 1957 |
---|---|
Description: | Man measuring Drive Gear that was later purchased by Foster Wheeler Corporation and used by Pennsylvania Power & Light Company of Sunbury Station, Shamokin... |
Date: | 04 18 1957 |
---|---|
Description: | This roll drive pinion was purchased by E.W. Bliss Co of Salem, Ohio, and later used by Empire Steel Company. Falk original caption reads: "Forging being p... |
Date: | 04 19 1957 |
---|---|
Description: | A man oversees the manufacturing process of a roll drive pinion which was purchased by E.W. Bliss Company of Salem, Ohio, and used by Empire Steel Company.... |
Date: | 11 25 1957 |
---|---|
Description: | A male employee operates a large machine at the Falk Corporation. The gear was purchased and used by the Falk Corporation. Original Falk caption reads: "Th... |
Date: | 04 30 1958 |
---|---|
Description: | A male employee inspects a H.S. Grigate Gear. This gear, a marine propulsion drive, was later used by the United States Navy. |
Date: | 06 06 1958 |
---|---|
Description: | A male employee oversees the testing of a Lewellen Commercial Variator in the test lab at Falk. |
Date: | 06 06 1958 |
---|---|
Description: | A male employee stands next to a large shipping shield. This shield was purchased by Stearns-Rogers and used by Westinghouse. Original Falk caption reads, ... |
Date: | 10 08 1958 |
---|---|
Description: | Two male employees help transport a shipping shield. This shield was purchased by Stearns-Roger Company and used by Westinghouse. Original Falk caption rea... |
Date: | 11 21 1958 |
---|---|
Description: | Two men inspect a large gear which was later purchased by DeLaval Steam Turbine Company of Trenton, New Jersey. Original Falk caption reads, "This gear is ... |
Date: | 01 16 1959 |
---|---|
Description: | Two men guide cement blocks that comprise a casting for a gear that will be used in a cement kiln. The final gear was later purchased by F.L. Smidth and Co... |
Date: | 02 17 1959 |
---|---|
Description: | A male employee inspects the ring gear which was later purchased by F.L. Smidth and Company of New York, New York, and used by St. Lawrence Cement Company ... |
Date: | 05 20 1959 |
---|---|
Description: | A man attends to a control panel of a factory machine that tests a large gear. The Falk Corporation later purchased and used this gear. Original Falk capti... |
Date: | 11 05 1959 |
---|---|
Description: | Two male employees operate a large factory machine. |
Date: | 02 14 1961 |
---|---|
Description: | Two men crouch atop of the large gear, while another stands at the side overseeing the lift. This gear was purchased and used by the Ladish Company of Cuda... |
Date: | 06 07 1963 |
---|---|
Description: | Single helical hub gear that was a component of an oxygen furnace drive. This gear was purchased by Morgan Engineering Company and used by Pittsburgh Steel... |
Date: | 06 07 1963 |
---|---|
Description: | Single large helical hub gear that was a component of an oxygen furnace drive. This gear was purchased by Morgan Engineering Company and used by Pittsburgh... |
Date: | 12 02 1963 |
---|---|
Description: | An employee stands near a cross rail that was later purchased by Onnsud Machine Works and used by Avco Corporation for cargo planes. Falk caption reads,"Ma... |
Date: | 07 29 1966 |
---|---|
Description: | Ron Kudlewski, a Falk employee, attends to the test stand for large motors in the High Speed Department. This motor was later purchased and used by the Lou... |
If you didn't find the material you searched for, our Library Reference Staff can help.
Call our reference desk at 608-264-6535 or email us at: