Date: | 02 1907 |
---|---|
Description: | Workers look on as machine parts are tested at International Harvester's Milwaukee Works. This photograph was displayed at the 1915 Panama-Pacific Internat... |
Date: | 10 1938 |
---|---|
Description: | Factory workers spray-painting truck engine blocks in a paint room of International Harvester's Indianapolis Truck Engine Works. Original caption reads: "D... |
Date: | 10 1938 |
---|---|
Description: | Factory operator washing motor truck engine blocks at International Harvester's Indianapolis Motor Truck Works. Original caption reads: "A Blakeslee washin... |
Date: | 10 1938 |
---|---|
Description: | Factory workers preparing completed International truck engines for shipment at International Harvester's Indianapolis Motor Truck Engine Works. Original c... |
Date: | |
---|---|
Description: | Two factory workers assemble motor truck engines at International Harvester's Indianapolis Motor Truck Engine Works. |
Date: | 1977 |
---|---|
Description: | Three assembly line workers assembling a motor truck engine at International Harvester's Indianapolis Motor Truck Engine Works. |
Date: | 08 20 1947 |
---|---|
Description: | Display of a 50-ton machine, developed by the Gisholt Machine Company, that will help speed up production of automobile crankshafts. W.A. Smlja, on the lef... |
Date: | 12 07 1955 |
---|---|
Description: | A worker welds together sections of a press slide that was later purchased by Federal Engineering and used by the automotive industry. |
Date: | 03 03 1956 |
---|---|
Description: | Two long-time Falk employees, Bob Quitzow and Frank Ruscitti, work in the gas cutting department. Original Falk caption reads: "View of 'Bug' cutting Depar... |
Date: | 04 14 1956 |
---|---|
Description: | View of the manufacturing process of vacuum chucks. Used for skin milling, this particular order, according to an original Falk caption, "covers four dupli... |
Date: | 04 14 1956 |
---|---|
Description: | Two men simultaneously weld. According to an original Falk caption, "rough weight. 72000 pound est.-Unit was rough machine to with [sic]. 1/4 inch o... |
Date: | 04 14 1956 |
---|---|
Description: | View of the manufacturing process of vacuum chucks. Used for skin milling, this particular order, according to an original Falk caption, "covers four dupli... |
Date: | 02 14 1957 |
---|---|
Description: | A male employee stands near a screw press washer. The speed reducer shown is a Right Angle, Double Red. Later purchased and used by the American Boxboard C... |
Date: | 03 13 1957 |
---|---|
Description: | Described by the orginial Falk caption with "91 teeth, .77039 DP, 12 inch Face Meshes with 15 tooth pinion. Gear is shown on Drawing 317096 and Pinion on 2... |
Date: | 04 03 1957 |
---|---|
Description: | Man measuring Drive Gear that was later purchased by Foster Wheeler Corporation and used by Pennsylvania Power & Light Company of Sunbury Station, Shamokin... |
Date: | 04 18 1957 |
---|---|
Description: | This roll drive pinion was purchased by E.W. Bliss Co of Salem, Ohio, and later used by Empire Steel Company. Falk original caption reads: "Forging being p... |
Date: | 04 19 1957 |
---|---|
Description: | A man oversees the manufacturing process of a roll drive pinion which was purchased by E.W. Bliss Company of Salem, Ohio, and used by Empire Steel Company.... |
Date: | 06 14 1957 |
---|---|
Description: | Two seated men weld a sugar mill drive that was later purchased by E.L. Dennis Engineering Company of New Orleans, Louisiana and used by A. Wilbert's Sons ... |
Date: | 06 1957 |
---|---|
Description: | A seated man welds a sugar mill drive that was later purchased by E.L. Dennis Engineering Company of New Orleans, Louisiana and used by A. Wilbert's Sons M... |
Date: | 04 30 1958 |
---|---|
Description: | A male employee inspects a H.S. Grigate Gear. This gear, a marine propulsion drive, was later used by the United States Navy. |
If you didn't find the material you searched for, our Library Reference Staff can help.
Call our reference desk at 608-264-6535 or email us at: