Search the Wisconsin Historical Society's collections

Searching for

Refine by

Results 1-20 of 26

Photograph

Fuller & Johnson Mfg. Co., Ltd.

Date: 1910
Description: Elevated view of the Fuller & Johnson Mfg. Co., Ltd. The office was at 101-133 North Dickinson St. and these buildings were/are in the 1400 block between E...
Photograph

Gisholt Machine Company

Date: 
Description: Street view showing the back side of Gisholt machine works buildings located in the 1400 block at the corner of E. Mifflin and N. Dickinson streets. The in...
Photograph

Gisholt Foundry

Date: 
Description: View of two workers pouring molten metal on the floor of the Gisholt plant. There are two massive chain hoists, suspended from a bridge crane, that are hol...
Photograph

Construction of Gisholt Building

Date: 
Description: View of construction of the skywalk across Baldwin Street at the Gisholt plant, facing East Washington Avenue. Two workers, one obscured by a beam, are unl...
Photograph

Thaden T-2 Aircraft with Comet 7-D Engine

Date: 07 22 1929
Description: Three-quarter view from front left of a Thaden T-2 parked outdoors. Manufactured by the Thaden Metal Aircraft Company of San Francisco, California. The com...
Photograph

Thaden T-2 Aircraft with Comet 7-D Engine

Date: 07 22 1929
Description: Right side profile view of the front of a Comet 7-D air-cooled radial piston engine and wooden propeller on a Thaden T-2 aircraft. A design of the Comet En...
Photograph

Kreider-Reisner C-4 Challenger with Comet Engine

Date: 07 22 1929
Description: Left side profile view of a 7-cylinder Comet air-cooled radial piston engine and propeller on a Kreider-Reisner C-4 Challenger aircraft. A design of the Co...
Photograph

Sierra BLW-2 Aircraft with Comet 7-RA Engine

Date: 07 22 1929
Description: View towards the front of a Sierra BLW-2 aircraft, fitted with a Comet 7-RA air-cooled radial piston engine and a wooden Westinghouse Micarta propeller. Mo...
Photograph

Aircraft Manufacturer and 7-Cylinder Comet Engine

Date: 07 22 1929
Description: Left side view of the 7-cylinder Comet engine fitted to the nose of an aircraft under construction. The fuselage is standing on the factory floor. A work t...
Photograph

Bach 3-CT-4 with Comet 7-RA Engines

Date: 07 22 1929
Description: Front view of a trimotor Bach 3-CT-4 manufactured by the Bach Aircraft Company of Santa Monica, California. The company was formed in 1927 by L. Morton Bac...
Photograph

Bach 3-CT-4 with Comet 7-RA Engines

Date: 07 22 1929
Description: Three-quarter view from front left towards a trimotor Bach 3-CT-4 manufactured by the Bach Aircraft Company of Santa Monica, California. The company was fo...
Photograph

7-Cylinder Comet Airplane Engine

Date: 07 22 1929
Description: Profile view of a 7-cylinder Comet air-cooled radial piston engine, designed by the Comet Engine Corporation on an unidentified make of aircraft at the Oak...
Photograph

7-RA Comet Engine on Alexander Eaglerock A-12 Aircraft

Date: 04 22 1930
Description: Front view of a Alexander Eaglerock A-12 aircraft fitted with the 7-RA Comet air-cooled radial piston engine with seven cylinders. The fixed-wing plane sit...
Photograph

View of Lathes by American Tool Works

Date: 
Description: View of new turret lathe (center) manufactured by American Tool Works. It is standing on a factory floor flanked by other similar machines that are attache...
Photograph

28" Old Type Gisholt Turret Lathe

Date: 08 14 1911
Description: Close-up of a 28" Old Type Gisholt turret lathe at the Packard Motor Car Company factory. This lathe machined a brake band support. The original envelo...
Photograph

View of a 28" Old Type Gisholt Turret Lathe

Date: 08 14 1911
Description: View of a 28" Old Type Gisholt turret lathe at the Packard Motor Car Company factory. This lathe machined a brake band support. The original envelope ho...
Photograph

Gisholt Turret Lathes in Peerless Auto Motor Car Company

Date: 
Description: View of a battery of turret lathes in the "Gisholt Department" in a factory of the Peerless Auto Motor Car Company taken while machinery is in operation. T...
Photograph

Gisholt Turret Lathes in Peerless Auto Motor Car Company

Date: 
Description: Elevated view of a room full of turret lathes in the "Gisholt Department" in a factory of the Peerless Auto Motor Car Company taken while the machinery is ...
Photograph

21" and 24" Gisholt Lathes at Willys-Overland Motor Company

Date: 11 21 1912
Description: View of 21" and 24" lathes on the Willys-Overland Motor Company factory floor. These lathes machined rear axle parts, which are piled at each work station....
Photograph

Workers in the Gisholt Department at the Buick Company Plant #1

Date: 
Description: Factory workers standing with their arms crossed on the plant floor in the Gisholt Department of the Buick Company Plant #1 alongside lathes, and machined ...

Have Questions?

If you didn't find the material you searched for, our Library Reference Staff can help.

Call our reference desk at 608-264-6535 or email us at: