Date: | 07 22 1929 |
---|---|
Description: | Profile view of a 7-cylinder Comet air-cooled radial piston engine, designed by the Comet Engine Corporation on an unidentified make of aircraft at the Oak... |
Date: | |
---|---|
Description: | Abstract profile of a 7-cylinder Comet airplane engine without a propeller. It was designed by the Comet Engine Corporation. |
Date: | 01 24 1930 |
---|---|
Description: | View from front of a 7-cylinder Comet airplane engine undergoing assembly. The engine is mounted to a wooden stand, located in a brick manufacturing buildi... |
Date: | 06 01 1929 |
---|---|
Description: | Two 7-cylinder Comet engines assembled with cams are set up on a factory floor. Supported in opposing engine stands vertically and horizontally, they are u... |
Date: | 01 24 1930 |
---|---|
Description: | View towards a factory man working at a plant that assembled Comet engines for aircraft. The man is standing at a desk fitted with instruments in a narrow ... |
Date: | 01 24 1930 |
---|---|
Description: | View of two factory men at work desks at a plant that assembled Comet aircraft engines. They are sitting on wooden stools between Korn scales in a narrow b... |
Date: | 11 07 1929 |
---|---|
Description: | Interior of a factory floor, with several large machines for manufacturing aircraft engines under the skylights. A Gisholt lathe is prominently pictured se... |
Date: | 11 07 1929 |
---|---|
Description: | Interior view of a factory floor. Machinery by Whitcomb Manufacturing Company is in the right foreground, and a Comet 7-cylinder aircraft engine is in the ... |
Date: | 11 1929 |
---|---|
Description: | Interior of a factory floor, with several large machines for manufacturing aircraft engines, including Landis, Whitcomb Manufacturing Company and Gisholt. ... |
Date: | 03 20 1930 |
---|---|
Description: | View inside a 7-D Comet aircraft engine manufacturing and assembly plant. An engine with nose cowling, propeller shaft and cylinders is supported by an eng... |
Date: | 04 22 1930 |
---|---|
Description: | Front view of a Alexander Eaglerock A-12 aircraft fitted with the 7-RA Comet air-cooled radial piston engine with seven cylinders. The fixed-wing plane sit... |
Date: | |
---|---|
Description: | View of new turret lathe (center) manufactured by American Tool Works. It is standing on a factory floor flanked by other similar machines that are attache... |
Date: | 08 14 1911 |
---|---|
Description: | Close-up of a 28" Old Type Gisholt turret lathe at the Packard Motor Car Company factory. This lathe machined a brake band support. The original envelo... |
Date: | 08 14 1911 |
---|---|
Description: | View of a 28" Old Type Gisholt turret lathe at the Packard Motor Car Company factory. This lathe machined a brake band support. The original envelope ho... |
Date: | |
---|---|
Description: | View of a battery of turret lathes in the "Gisholt Department" in a factory of the Peerless Auto Motor Car Company taken while machinery is in operation. T... |
Date: | |
---|---|
Description: | Elevated view of a room full of turret lathes in the "Gisholt Department" in a factory of the Peerless Auto Motor Car Company taken while the machinery is ... |
Date: | 11 21 1912 |
---|---|
Description: | View of 21" and 24" lathes on the Willys-Overland Motor Company factory floor. These lathes machined rear axle parts, which are piled at each work station.... |
Date: | |
---|---|
Description: | Factory workers standing with their arms crossed on the plant floor in the Gisholt Department of the Buick Company Plant #1 alongside lathes, and machined ... |
Date: | |
---|---|
Description: | View of the back side of the Madison plant from across a dirt road, which is lined with a plank sidewalk and telephone poles, towards several plant buildin... |
Date: | |
---|---|
Description: | View of a loading platform by the railroad track at the first machine works plant of the Gisholt Machine Company, located at the 1400-block of East Mifflin... |
If you didn't find the material you searched for, our Library Reference Staff can help.
Call our reference desk at 608-264-6535 or email us at: