Search the Wisconsin Historical Society's collections
Filter: Categories of Wisconsin Historical Images
Filter: Subject of Work
Filter: Subject of metal industry
Filter: Community of Milwaukee
| Date: | |
|---|---|
| Description: | Plate Steel Spiral Casing for 70,000 horse-power Niagara Falls hydraulic turbine unit at the Allis-Chalmers Manufacturing Company erecting shop. The castin... |
| Date: | 1946 |
|---|---|
| Description: | Workers chipping imperfections from a rough casting. |
| Date: | 11 08 1947 |
|---|---|
| Description: | Prize winners at a costume dance sponsored by Local 1114, United Steelworkers of America (Harnischfeger Corporation). |
| Date: | 1914 |
|---|---|
| Description: | Three workers pouring molten metal into small containers at International Harvester's Milwaukee Works. The factory was owned by the Milwaukee Harvester Com... |
| Date: | 1920 |
|---|---|
| Description: | Worker forming the tip of a steel rod at International Harvester Milwaukee Works. The factory was owned by the Milwaukee Harvester Company until 1902. |
| Date: | 1916 |
|---|---|
| Description: | Two workers pouring molten metal from a crane-held vat into a mold to make castings at International Harvester's Milwaukee Works. The factory was owned by ... |
| Date: | 1914 |
|---|---|
| Description: | A worker prepares to stamp a heated metal rod at International Harvester's Milwaukee Works (factory). |
| Date: | 11 04 1937 |
|---|---|
| Description: | Two factory workers pour molten metal into diesel engine crankcase forms at the Milwaukee Works foundry. Photograph taken by Don Jones. |
| Date: | 12 07 1955 |
|---|---|
| Description: | A worker welds together sections of a press slide that was later purchased by Federal Engineering and used by the automotive industry. |
| Date: | 03 03 1956 |
|---|---|
| Description: | Two long-time Falk employees, Bob Quitzow and Frank Ruscitti, work in the gas cutting department. Original Falk caption reads: "View of 'Bug' cutting Depar... |
| Date: | 04 14 1956 |
|---|---|
| Description: | View of the manufacturing process of vacuum chucks. Used for skin milling, this particular order, according to an original Falk caption, "covers four dupli... |
| Date: | 04 14 1956 |
|---|---|
| Description: | Two men simultaneously weld. According to an original Falk caption, "rough weight. 72000 pound est.-Unit was rough machine to with [sic]. 1/4 inch o... |
| Date: | 04 14 1956 |
|---|---|
| Description: | View of the manufacturing process of vacuum chucks. Used for skin milling, this particular order, according to an original Falk caption, "covers four dupli... |
| Date: | 08 24 1956 |
|---|---|
| Description: | Purchased by Allis Chalmers and used by the Marquette Cement Company, original Falk caption reads:"M.O. NO. 5541-0574 & 5520-7424. Type of Unit, 12 1/2 GDA... |
| Date: | 02 14 1957 |
|---|---|
| Description: | A male employee stands near a screw press washer. The speed reducer shown is a Right Angle, Double Red. Later purchased and used by the American Boxboard C... |
| Date: | 03 13 1957 |
|---|---|
| Description: | Described by the orginial Falk caption with "91 teeth, .77039 DP, 12 inch Face Meshes with 15 tooth pinion. Gear is shown on Drawing 317096 and Pinion on 2... |
| Date: | 04 03 1957 |
|---|---|
| Description: | Man measuring Drive Gear that was later purchased by Foster Wheeler Corporation and used by Pennsylvania Power & Light Company of Sunbury Station, Shamokin... |
| Date: | 04 18 1957 |
|---|---|
| Description: | This roll drive pinion was purchased by E.W. Bliss Co of Salem, Ohio, and later used by Empire Steel Company. Falk original caption reads: "Forging being p... |
| Date: | 04 19 1957 |
|---|---|
| Description: | A man oversees the manufacturing process of a roll drive pinion which was purchased by E.W. Bliss Company of Salem, Ohio, and used by Empire Steel Company.... |
If you didn't find the material you searched for, our Library Reference Staff can help.
Call our reference desk at 608-264-6535 or email us at:
