Search the Wisconsin Historical Society's collections
Filter: Categories of Wisconsin Historical Images
Filter: Subject of Metal industry
Filter: Subject of industries
Filter: Subject of machinery
| Date: | 1910 |
|---|---|
| Description: | Rows of machinery, parts and tools in the forge shop at International Harvester's Hamilton Works in Hamilton, Ontario, Canada. |
| Date: | 07 22 1936 |
|---|---|
| Description: | Workers manufacturing parts in a forge shop at International Harvester's McCormick Works. The McCormick Works was built by Cyrus McCormick in 1873 and beca... |
| Date: | 1914 |
|---|---|
| Description: | A worker prepares to stamp a heated metal rod at International Harvester's Milwaukee Works (factory). |
| Date: | 1930 |
|---|---|
| Description: | Factory worker using a press at the Chattanooga Plow Works. |
| Date: | 1930 |
|---|---|
| Description: | Factory workers at the Chattanooga Plow Works. |
| Date: | 11 04 1937 |
|---|---|
| Description: | Two factory workers pour molten metal into diesel engine crankcase forms at the Milwaukee Works foundry. Photograph taken by Don Jones. |
| Date: | 12 07 1955 |
|---|---|
| Description: | A worker welds together sections of a press slide that was later purchased by Federal Engineering and used by the automotive industry. |
| Date: | 03 03 1956 |
|---|---|
| Description: | Two long-time Falk employees, Bob Quitzow and Frank Ruscitti, work in the gas cutting department. Original Falk caption reads: "View of 'Bug' cutting Depar... |
| Date: | 04 14 1956 |
|---|---|
| Description: | View of the manufacturing process of vacuum chucks. Used for skin milling, this particular order, according to an original Falk caption, "covers four dupli... |
| Date: | 04 14 1956 |
|---|---|
| Description: | Two men simultaneously weld. According to an original Falk caption, "rough weight. 72000 pound est.-Unit was rough machine to with [sic]. 1/4 inch o... |
| Date: | 04 14 1956 |
|---|---|
| Description: | View of the manufacturing process of vacuum chucks. Used for skin milling, this particular order, according to an original Falk caption, "covers four dupli... |
| Date: | 06 15 1956 |
|---|---|
| Description: | Single helical mills gear that was later purchased by Nordberg and used by Universal Atlas Cement Company of Milwaukee. Original Falk caption reads: "23/29... |
| Date: | 09 04 1956 |
|---|---|
| Description: | A view looking west of several workers in the Heat Treating Department of the Falk Corporation. |
| Date: | 10 09 1956 |
|---|---|
| Description: | Original Falk caption reads: "Mill Gears, 21 or 22.289T, 1 1/2 DP, 26 inch F. 100 hp, 18.3 rpm mills." Purchaser was Allis Chalmers and it was used by the ... |
| Date: | 03 13 1957 |
|---|---|
| Description: | Described by the orginial Falk caption with "91 teeth, .77039 DP, 12 inch Face Meshes with 15 tooth pinion. Gear is shown on Drawing 317096 and Pinion on 2... |
| Date: | 04 03 1957 |
|---|---|
| Description: | Man measuring Drive Gear that was later purchased by Foster Wheeler Corporation and used by Pennsylvania Power & Light Company of Sunbury Station, Shamokin... |
| Date: | 04 18 1957 |
|---|---|
| Description: | This roll drive pinion was purchased by E.W. Bliss Co of Salem, Ohio, and later used by Empire Steel Company. Falk original caption reads: "Forging being p... |
| Date: | 04 19 1957 |
|---|---|
| Description: | A man oversees the manufacturing process of a roll drive pinion which was purchased by E.W. Bliss Company of Salem, Ohio, and used by Empire Steel Company.... |
| Date: | 06 14 1957 |
|---|---|
| Description: | Two seated men weld a sugar mill drive that was later purchased by E.L. Dennis Engineering Company of New Orleans, Louisiana and used by A. Wilbert's Sons ... |
| Date: | 06 1957 |
|---|---|
| Description: | A seated man welds a sugar mill drive that was later purchased by E.L. Dennis Engineering Company of New Orleans, Louisiana and used by A. Wilbert's Sons M... |
If you didn't find the material you searched for, our Library Reference Staff can help.
Call our reference desk at 608-264-6535 or email us at: