Date: | 07 02 1970 |
---|---|
Description: | Twin pinion that was a later component of a tug on a controllable pitch propeller. This product was purchased by the Electro-Motive Division of the General... |
Date: | 07 22 1970 |
---|---|
Description: | Large mill drive that was purchased by Koppers Corporation and used by Hanna Mining. Original Falk caption reads, "Large ring gear made to 1970. First ring... |
Date: | 09 04 1970 |
---|---|
Description: | This two pinion combining gear, a component of a main propulsion system was purchased by Fairbanks Morse and used by Falcon Carriers Incorporated. Original... |
Date: | 09 04 1970 |
---|---|
Description: | Two pinion combining gear that is a component of a main propulsion system. This product was purchased by Fairbanks Morse and used by Falcon Tankers. Origin... |
Date: | 03 02 1971 |
---|---|
Description: | A male employee, Bill Hoppe, attends to a special cutter head drive. This product was purchased and used by the Great Lakes Dredge and Dry Dock company. Fa... |
Date: | 12 29 1970 |
---|---|
Description: | A male employee, Dennis Zastrow, inspects a gear in the gear lab. |
Date: | 01 19 1971 |
---|---|
Description: | View of a 29 foot in diameter ring gear that is a component of a ball mill drive on a truck. This ring gear was purchased by Koppers and used by Hannah Min... |
Date: | 06 23 1971 |
---|---|
Description: | This speed increaser, a component of a generator drive, was purchased by Allis Chalmers and used by the United States Corps of Engineers. Falk caption read... |
Date: | 06 23 1971 |
---|---|
Description: | Special speed increaser on the factory floor. This product was purchased by Allis Chalmers and used by the United States Corps of Engineers. Falk caption r... |
Date: | 04 15 1971 |
---|---|
Description: | Male employee, Timothy Burton, inspecting a drive agitator. This product was purchased by Coppus Engineering Corporation and used by E.R. Squibb and Sons. ... |
Date: | 03 26 1971 |
---|---|
Description: | Original Falk caption reads, "Dynamic balancing of a YQA element for use in YQA bulletin 171-110." Male employee in photograph is Edward Rhys. |
Date: | 08 15 1971 |
---|---|
Description: | A male employee, Ed Grown, attends to a large ball mill drive. This product was purchased by Allis Chalmers and used by Pima Mining Company. Falk caption r... |
Date: | 06 28 1971 |
---|---|
Description: | Component of a kiln that was purchased by F.L. Smidth Company. Falk caption reads, "This is the gear rim for the first fabricate, T-section, split, spring ... |
Date: | 07 24 1971 |
---|---|
Description: | Slewing drive that was purchased by the Dravo Corporation. Original Falk caption reads, "Slewing Drive-2 parts-(1) 19 feet 5 inches O.D. x 6 1/2 inch wide ... |
Date: | 08 24 1971 |
---|---|
Description: | Special speed increaser that was purchased by Allis Chalmers and used by the United States Corps of Engineers. Falk caption reads, "Low level dam site/gene... |
Date: | 09 14 1971 |
---|---|
Description: | View of a speed reducer that was purchased by the Kennedy Van Saun Corporation and used by Gresic Cement in Indonesia. Falk caption reads, "Design HP-3150,... |
Date: | 09 15 1971 |
---|---|
Description: | This product was purchased by the Kennedy Van Saun Corporation and used by Gresic Cemenent of Indonesia. Original Falk caption reads, "Design HP- 3150, ser... |
Date: | 10 08 1971 |
---|---|
Description: | This product was purchased by Allis Chalmers and used by Kennecott Copper. Falk caption reads, "5CB3-10 BS speed reducer, ratio 7.394:1 with rifle drilled ... |
Date: | 11 24 1971 |
---|---|
Description: | View of a 600 J shaft mount. Man in photograph is George Tinger. |
Date: | 10 08 1971 |
---|---|
Description: | This product was purchased by Allis-Chalmers of West Allis, Wisconsin. Falk caption reads, "Solid riding ring 102,000 pound rough weight, 244 inches in dia... |
If you didn't find the material you searched for, our Library Reference Staff can help.
Call our reference desk at 608-264-6535 or email us at: