Date: | 06 10 1924 |
---|---|
Description: | Worker stands on a Nordberg machine on the floor of what is likely a plant owned by Republic Iron & Steel Co. |
Date: | 10 1938 |
---|---|
Description: | Factory worker using a lathe at International Harvester's Indianapolis Truck Engine Works. Original caption reads: "LeBlond crankshaft lathe showing detail... |
Date: | 1945 |
---|---|
Description: | Man in protective gloves and masked helmet against heat and flame works on heavy machinery at the Falk Corporation, known for production of industrial gear... |
Date: | 08 18 1943 |
---|---|
Description: | A workman grinds a cylinder head at Nagle-Hart Tractor & Equipment Company, 754 East Washington Avenue. |
Date: | 06 14 1940 |
---|---|
Description: | Men posing in front of a rock crusher manufactured by Wisconsin Foundry & Machine Company, 623 East Main Street. |
Date: | 08 20 1947 |
---|---|
Description: | Display of a 50-ton machine, developed by the Gisholt Machine Company, that will help speed up production of automobile crankshafts. W.A. Smlja, on the lef... |
Date: | 12 07 1955 |
---|---|
Description: | A worker welds together sections of a press slide that was later purchased by Federal Engineering and used by the automotive industry. |
Date: | 03 03 1956 |
---|---|
Description: | Two long-time Falk employees, Bob Quitzow and Frank Ruscitti, work in the gas cutting department. Original Falk caption reads: "View of 'Bug' cutting Depar... |
Date: | 04 14 1956 |
---|---|
Description: | View of the manufacturing process of vacuum chucks. Used for skin milling, this particular order, according to an original Falk caption, "covers four dupli... |
Date: | 04 14 1956 |
---|---|
Description: | Two men simultaneously weld. According to an original Falk caption, "rough weight. 72000 pound est.-Unit was rough machine to with [sic]. 1/4 inch o... |
Date: | 04 14 1956 |
---|---|
Description: | View of the manufacturing process of vacuum chucks. Used for skin milling, this particular order, according to an original Falk caption, "covers four dupli... |
Date: | 09 04 1956 |
---|---|
Description: | A view looking west of several workers in the Heat Treating Department of the Falk Corporation. |
Date: | 08 24 1956 |
---|---|
Description: | Purchased by Allis Chalmers and used by the Marquette Cement Company, original Falk caption reads:"M.O. NO. 5541-0574 & 5520-7424. Type of Unit, 12 1/2 GDA... |
Date: | 03 13 1957 |
---|---|
Description: | Described by the orginial Falk caption with "91 teeth, .77039 DP, 12 inch Face Meshes with 15 tooth pinion. Gear is shown on Drawing 317096 and Pinion on 2... |
Date: | 04 03 1957 |
---|---|
Description: | Man measuring Drive Gear that was later purchased by Foster Wheeler Corporation and used by Pennsylvania Power & Light Company of Sunbury Station, Shamokin... |
Date: | 04 18 1957 |
---|---|
Description: | This roll drive pinion was purchased by E.W. Bliss Co of Salem, Ohio, and later used by Empire Steel Company. Falk original caption reads: "Forging being p... |
Date: | 04 19 1957 |
---|---|
Description: | A man oversees the manufacturing process of a roll drive pinion which was purchased by E.W. Bliss Company of Salem, Ohio, and used by Empire Steel Company.... |
Date: | 06 14 1957 |
---|---|
Description: | Two seated men weld a sugar mill drive that was later purchased by E.L. Dennis Engineering Company of New Orleans, Louisiana and used by A. Wilbert's Sons ... |
Date: | 06 1957 |
---|---|
Description: | A seated man welds a sugar mill drive that was later purchased by E.L. Dennis Engineering Company of New Orleans, Louisiana and used by A. Wilbert's Sons M... |
Date: | 07 03 1957 |
---|---|
Description: | Two male employees ease the top half of a metal casing over a Parallel Double Red Shaft that was purchased by E.L. Smidth and Company. Original Falk captio... |
If you didn't find the material you searched for, our Library Reference Staff can help.
Call our reference desk at 608-264-6535 or email us at: