Date: | 05 04 1886 |
---|---|
Description: | Edward P. Allis Reliance Works under the protection of the Wisconsin State Militia during the first general labor strike. The strike is also known as the ... |
Date: | 1940 |
---|---|
Description: | Franklin D. Roosevelt, Wisconsin Governor Julius P. Heil, and other officials touring the Allis-Chalmers plant. |
Date: | |
---|---|
Description: | Plate Steel Spiral Casing for 70,000 horse-power Niagara Falls hydraulic turbine unit at the Allis-Chalmers Manufacturing Company erecting shop. The castin... |
Date: | 1954 |
---|---|
Description: | Workers at the A.O. Smith Corporation in Milwaukee assembling frames for Cadillac automobiles. In 1902 Arthur O. Smith, son of the company's founder, produ... |
Date: | 1920 |
---|---|
Description: | Alfred W. Lawson (second from right) and his employees in front of his South Milwaukee factory with the center section of his new airplane, the Lawson Midn... |
Date: | 1880 |
---|---|
Description: | E.P. Allis & Co's Reliance Works: steam cranes and ovens. |
Date: | 1921 |
---|---|
Description: | Highway Commission dump truck photographed outside the Heil Company factory in Milwaukee. The truck was a Nash four-wheel drive model with the body built ... |
Date: | 1949 |
---|---|
Description: | Welding a milk truck at the Heil Corporation in Milwaukee. The Heil company was founded by German-born Julius P. Heil in 1901. As the Heil Rail Joint Wel... |
Date: | 02 1943 |
---|---|
Description: | Enola O'Connell, the only woman welder at the Heil Company during World War II, working on gasoline trailer tanks. A 32-year-old widow and the mother of o... |
Date: | 12 07 1955 |
---|---|
Description: | A worker welds together sections of a press slide that was later purchased by Federal Engineering and used by the automotive industry. |
Date: | 03 03 1956 |
---|---|
Description: | Two long-time Falk employees, Bob Quitzow and Frank Ruscitti, work in the gas cutting department. Original Falk caption reads: "View of 'Bug' cutting Depar... |
Date: | 04 14 1956 |
---|---|
Description: | View of the manufacturing process of vacuum chucks. Used for skin milling, this particular order, according to an original Falk caption, "covers four dupli... |
Date: | 04 14 1956 |
---|---|
Description: | Two men simultaneously weld. According to an original Falk caption, "rough weight. 72000 pound est.-Unit was rough machine to with [sic]. 1/4 inch o... |
Date: | 04 14 1956 |
---|---|
Description: | View of the manufacturing process of vacuum chucks. Used for skin milling, this particular order, according to an original Falk caption, "covers four dupli... |
Date: | 06 15 1956 |
---|---|
Description: | Single helical mills gear that was later purchased by Nordberg and used by Universal Atlas Cement Company of Milwaukee. Original Falk caption reads: "23/29... |
Date: | 09 04 1956 |
---|---|
Description: | A view looking west of several workers in the Heat Treating Department of the Falk Corporation. |
Date: | 10 09 1956 |
---|---|
Description: | Original Falk caption reads: "Mill Gears, 21 or 22.289T, 1 1/2 DP, 26 inch F. 100 hp, 18.3 rpm mills." Purchaser was Allis Chalmers and it was used by the ... |
Date: | 02 14 1957 |
---|---|
Description: | A male employee stands near a screw press washer. The speed reducer shown is a Right Angle, Double Red. Later purchased and used by the American Boxboard C... |
Date: | 03 13 1957 |
---|---|
Description: | Described by the orginial Falk caption with "91 teeth, .77039 DP, 12 inch Face Meshes with 15 tooth pinion. Gear is shown on Drawing 317096 and Pinion on 2... |
If you didn't find the material you searched for, our Library Reference Staff can help.
Call our reference desk at 608-264-6535 or email us at: