Search the Wisconsin Historical Society's collections
Filter: Categories of Wisconsin Historical Images
Filter: Subject of Factories
Filter: Creator Name of Unknown
Filter: Subject of machinery
| Date: | |
|---|---|
| Description: | French Battery and Carbon Company, later known as Rayovac. The old circle belt in the Madison plant. |
| Date: | 1918 |
|---|---|
| Description: | Women working on the automobile assembly line at Nash Motors (later American Motors) during World War I. |
| Date: | |
|---|---|
| Description: | Men working on the automobile assembly line in the Rouge Plant of the Ford Motor Company. |
| Date: | |
|---|---|
| Description: | General Motors chassis assembly. Men are working among the machinery. |
| Date: | 1917 |
|---|---|
| Description: | Interior shot of a group of men, women and boys at the Gillette Tire Company. The Gillette Safety Tire Company was founded in Eau Claire in 1916 and the cr... |
| Date: | 1972 |
|---|---|
| Description: | Slightly elevated view of women at an unidentified warehouse, probably in California, sizing, weighing, and bagging carrots for market. |
| Date: | 01 12 1949 |
|---|---|
| Description: | Isabel Olson, an employee of the United Rubber Company in Eau Claire, examining fabric for a pocket in a heavy service tire. Although most women who joine... |
| Date: | 12 07 1955 |
|---|---|
| Description: | A worker welds together sections of a press slide that was later purchased by Federal Engineering and used by the automotive industry. |
| Date: | 03 03 1956 |
|---|---|
| Description: | Two long-time Falk employees, Bob Quitzow and Frank Ruscitti, work in the gas cutting department. Original Falk caption reads: "View of 'Bug' cutting Depar... |
| Date: | 04 14 1956 |
|---|---|
| Description: | View of the manufacturing process of vacuum chucks. Used for skin milling, this particular order, according to an original Falk caption, "covers four dupli... |
| Date: | 04 14 1956 |
|---|---|
| Description: | Two men simultaneously weld. According to an original Falk caption, "rough weight. 72000 pound est.-Unit was rough machine to with [sic]. 1/4 inch o... |
| Date: | 04 14 1956 |
|---|---|
| Description: | View of the manufacturing process of vacuum chucks. Used for skin milling, this particular order, according to an original Falk caption, "covers four dupli... |
| Date: | 06 15 1956 |
|---|---|
| Description: | Single helical mills gear that was later purchased by Nordberg and used by Universal Atlas Cement Company of Milwaukee. Original Falk caption reads: "23/29... |
| Date: | 09 04 1956 |
|---|---|
| Description: | A view looking west of several workers in the Heat Treating Department of the Falk Corporation. |
| Date: | 10 09 1956 |
|---|---|
| Description: | Original Falk caption reads: "Mill Gears, 21 or 22.289T, 1 1/2 DP, 26 inch F. 100 hp, 18.3 rpm mills." Purchaser was Allis Chalmers and it was used by the ... |
| Date: | 03 13 1957 |
|---|---|
| Description: | Described by the orginial Falk caption with "91 teeth, .77039 DP, 12 inch Face Meshes with 15 tooth pinion. Gear is shown on Drawing 317096 and Pinion on 2... |
| Date: | 04 03 1957 |
|---|---|
| Description: | Man measuring Drive Gear that was later purchased by Foster Wheeler Corporation and used by Pennsylvania Power & Light Company of Sunbury Station, Shamokin... |
| Date: | 04 18 1957 |
|---|---|
| Description: | This roll drive pinion was purchased by E.W. Bliss Co of Salem, Ohio, and later used by Empire Steel Company. Falk original caption reads: "Forging being p... |
| Date: | 04 19 1957 |
|---|---|
| Description: | A man oversees the manufacturing process of a roll drive pinion which was purchased by E.W. Bliss Company of Salem, Ohio, and used by Empire Steel Company.... |
If you didn't find the material you searched for, our Library Reference Staff can help.
Call our reference desk at 608-264-6535 or email us at:
