Date: | 10 08 1971 |
---|---|
Description: | This product was purchased by Allis-Chalmers of West Allis, Wisconsin. Falk caption reads, "Solid riding ring 102,000 pound rough weight, 244 inches in dia... |
Date: | 11 24 1971 |
---|---|
Description: | View of a large gear that was a later component of a kiln used to pelletize iron ore. This product was purchased by Allis Chalmers and used by the Iron Ore... |
Date: | 03 13 1972 |
---|---|
Description: | Original Falk caption reads, "Largest bevel gears manufactured by Falk to date. This photograph was taken in the Heat Treat Department." Male employees in ... |
Date: | 07 08 1972 |
---|---|
Description: | Coupling that was purchased by Western Bearing of Sparks, Nevada and used by The Anaconda Company of Yerington, Nevada. Male employee in photograph is Glor... |
Date: | 07 03 1972 |
---|---|
Description: | Original Falk caption reads, "Record photos of Hobbing Machine number 252 in Shop 3." |
Date: | |
---|---|
Description: | Factory worker operating a "Hannifin quenching press" at International Harvester's Milwaukee Works. |
Date: | 12 1972 |
---|---|
Description: | View of a large casting made in the foundry. A male employee, Arthur Beoman, stands next to the casting as it is being lifted. This unit was purchased by C... |
Date: | 02 08 1973 |
---|---|
Description: | Two female employees, Virginia Breest on the left and Shirley Gunn on the right, attend to the speed increaser that is a later component of a jet engine co... |
Date: | 02 26 1973 |
---|---|
Description: | Original Falk caption reads, "Type 'F' unit housings. View of portage inspection machine in Shop 1." Male employee in photograph is Donald L. Vogt. |
Date: | 03 28 1974 |
---|---|
Description: | Original Falk caption reads, "This photo taken to illustrate pre-heating a large coupling hub by torch prior to making a shrink-fit mounting on a shaft." M... |
Date: | 07 15 1974 |
---|---|
Description: | Gear coupling that was purchased by A.G McKee and Company and used by Fior De Venezuela of South America. Falk caption reads, "Iron ore briquette roll driv... |
Date: | 10 18 1974 |
---|---|
Description: | Overhead view of a mixing fermenter that was later purchased by the Mixing Equipment Company Incorporated and used by Italproteine of Sardinia, Italy. Orig... |
Date: | 08 1975 |
---|---|
Description: | Large ring gear that is a later component of a kiln drive. This product was purchased by Allis Chalmers and used by National Steel Pellet Plant. Original F... |
Date: | 02 23 1976 |
---|---|
Description: | Bill Wagner, a Falk employee, attends to a large coupling sleeve. This unit was later used by the Auburn Plant-Baush Drill Press. Original Falk caption rea... |
Date: | 11 1976 |
---|---|
Description: | Two Falk employees, Arthur Hirt on the left, and Karl Becker on the right, attend to a large gear. This particular unit was purchased and used by United St... |
Date: | 02 04 1977 |
---|---|
Description: | A Falk employee, John Bartaczewicz, inspects a large inlet head. This particular unit was purchased by F.L. Smidth and Company. Original Falk caption reads... |
Date: | 03 1977 |
---|---|
Description: | This particular unit was purchased by Allis Chalmers and used by the Cleveland Cliffs Iron Company of the Tilden II Mine. |
Date: | 07 1977 |
---|---|
Description: | Duane Hanson and Norbert Winski attend to a large reducer and incher. This unit was purchased by Allis Chalmers and used by the Cleveland Cliffs Iron Compa... |
Date: | 01 17 1978 |
---|---|
Description: | William Kozlowski, a Falk employee, inspects a centrifugal compressor. This particular unit was purchased and used by the Cities Service Oil Company. |
Date: | 06 23 1978 |
---|---|
Description: | View of an autogenous mill from above. This unit was purchased by Hardinge Company, a division of Koppers Incorporated and used by the Cleveland Cliff Empi... |
If you didn't find the material you searched for, our Library Reference Staff can help.
Call our reference desk at 608-264-6535 or email us at: