Date: | 1910 |
---|---|
Description: | Elevated view of the Fuller & Johnson Mfg. Co., Ltd. The office was at 101-133 North Dickinson St. and these buildings were/are in the 1400 block between E... |
Date: | |
---|---|
Description: | Street view showing the back side of Gisholt machine works buildings located in the 1400 block at the corner of E. Mifflin and N. Dickinson streets. The in... |
Date: | |
---|---|
Description: | View of two workers pouring molten metal on the floor of the Gisholt plant. There are two massive chain hoists, suspended from a bridge crane, that are hol... |
Date: | |
---|---|
Description: | View of construction of the skywalk across Baldwin Street at the Gisholt plant, facing East Washington Avenue. Two workers, one obscured by a beam, are unl... |
Date: | 07 22 1929 |
---|---|
Description: | Three-quarter view from front left of a Thaden T-2 parked outdoors. Manufactured by the Thaden Metal Aircraft Company of San Francisco, California. The com... |
Date: | 07 22 1929 |
---|---|
Description: | Right side profile view of the front of a Comet 7-D air-cooled radial piston engine and wooden propeller on a Thaden T-2 aircraft. A design of the Comet En... |
Date: | 07 22 1929 |
---|---|
Description: | Left side profile view of a 7-cylinder Comet air-cooled radial piston engine and propeller on a Kreider-Reisner C-4 Challenger aircraft. A design of the Co... |
Date: | 07 22 1929 |
---|---|
Description: | Profile view of a 7-cylinder Comet air-cooled radial piston engine, designed by the Comet Engine Corporation on an unidentified make of aircraft at the Oak... |
Date: | 08 29 1929 |
---|---|
Description: | Three-quarter view from across a road towards a factory building at the Aircraft Engine Corporation located on 9601 Russet Street, Los Angeles, California.... |
Date: | 04 22 1930 |
---|---|
Description: | Right side profile view of an Alexander Eaglerock A-12 aircraft fitted with a Comet 7-RA air-cooled radial piston engine. A model of the Comet Engine Corpo... |
Date: | |
---|---|
Description: | View of new turret lathe (center) manufactured by American Tool Works. It is standing on a factory floor flanked by other similar machines that are attache... |
Date: | 08 14 1911 |
---|---|
Description: | Close-up of a 28" Old Type Gisholt turret lathe at the Packard Motor Car Company factory. This lathe machined a brake band support. The original envelo... |
Date: | 08 14 1911 |
---|---|
Description: | View of a 28" Old Type Gisholt turret lathe at the Packard Motor Car Company factory. This lathe machined a brake band support. The original envelope ho... |
Date: | |
---|---|
Description: | View of a battery of turret lathes in the "Gisholt Department" in a factory of the Peerless Auto Motor Car Company taken while machinery is in operation. T... |
Date: | |
---|---|
Description: | Elevated view of a room full of turret lathes in the "Gisholt Department" in a factory of the Peerless Auto Motor Car Company taken while the machinery is ... |
Date: | 11 21 1912 |
---|---|
Description: | View of 21" and 24" lathes on the Willys-Overland Motor Company factory floor. These lathes machined rear axle parts, which are piled at each work station.... |
Date: | |
---|---|
Description: | Factory workers standing with their arms crossed on the plant floor in the Gisholt Department of the Buick Company Plant #1 alongside lathes, and machined ... |
Date: | |
---|---|
Description: | General view of the Gisholt Machine Company newly constructed main office (center) at 1315 East Washington Avenue, a locker room for workers (to the right ... |
Date: | |
---|---|
Description: | View of the back side of the Madison plant from across a dirt road, which is lined with a plank sidewalk and telephone poles, towards several plant buildin... |
Date: | |
---|---|
Description: | View of a loading platform by the railroad track at the first machine works plant of the Gisholt Machine Company, located at the 1400-block of East Mifflin... |
If you didn't find the material you searched for, our Library Reference Staff can help.
Call our reference desk at 608-264-6535 or email us at: