Date: | 09 1908 |
---|---|
Description: | View of worker with a grey beard and hat standing and posing in front of a furnace inside IHC McCormick Works foundry. |
Date: | 03 13 1957 |
---|---|
Description: | Described by the orginial Falk caption with "91 teeth, .77039 DP, 12 inch Face Meshes with 15 tooth pinion. Gear is shown on Drawing 317096 and Pinion on 2... |
Date: | 06 06 1958 |
---|---|
Description: | A male employee stands next to a large shipping shield. This shield was purchased by Stearns-Rogers and used by Westinghouse. Original Falk caption reads, ... |
Date: | 11 21 1958 |
---|---|
Description: | Two men inspect a large gear which was later purchased by DeLaval Steam Turbine Company of Trenton, New Jersey. Original Falk caption reads, "This gear is ... |
Date: | 01 16 1959 |
---|---|
Description: | Two men guide cement blocks that comprise a casting for a gear that will be used in a cement kiln. The final gear was later purchased by F.L. Smidth and Co... |
Date: | 02 14 1961 |
---|---|
Description: | Two men crouch atop of the large gear, while another stands at the side overseeing the lift. This gear was purchased and used by the Ladish Company of Cuda... |
Date: | 05 1965 |
---|---|
Description: | Pinions that were purchased by U.S. Steel (Allegheny Project) and used by Gary Steel Works. Male employee in photograph is R. Ponto. |
Date: | 09 15 1966 |
---|---|
Description: | Falk caption reads, "Photos of ring gear to be displayed at the Association of Iron and Steel Engineers (AISE) show in Cleveland, Ohio, September 26th thro... |
Date: | 02 22 1967 |
---|---|
Description: | Walking dragline that was later purchased by Marion Power Shovel Company. Falk caption reads, "130 yard power dragline propel crank. Pattern 261C17. Castin... |
Date: | 08 15 1967 |
---|---|
Description: | A roll on/roll off freighter is shown and was later purchased by Sun Shipbuilding. Falk caption reads, "Half strut for 646 single screw-roll on/roll off fr... |
Date: | 12 13 1967 |
---|---|
Description: | Single helical gear purchased by The Fuller Company and later used in Jamaica (as a rotary kiln). Falk caption reads, "Single helical gear, 260 teeth 99667... |
Date: | 01 24 1968 |
---|---|
Description: | This maxipress purchased by The National Machinery Company. Falk caption reads, "6000 ton maxipress, 23-120T .7854DP (4 inch CP), 16 inch face. Gear: alloy... |
Date: | 03 11 1968 |
---|---|
Description: | Tire curing press that was later purchased by McNeil Akron Corporation. Falk caption reads, "14-90T, 10 P Spur, 7 inch face. Crank gears have two unique fe... |
Date: | 03 11 1968 |
---|---|
Description: | This turbine drive was later purchased and used by The Whiton Machine Company. Falk caption reads, "1110YPA-1 speed reducer with lube system and cooler, ra... |
Date: | 06 12 1968 |
---|---|
Description: | Bull gear for shaft mounted on a BOF drive. This gear was later purchased by Pennsylvania Engineering Corporation and used by Youngstown Sheet and Tube. Fa... |
Date: | 09 31 1968 |
---|---|
Description: | Split ring gear that is a component of a rod mill that was purchased by ACC-Vickers-Babcock Limited and then exported to India. Falk caption reads, "215 in... |
Date: | 10 31 1968 |
---|---|
Description: | Split ring gear that was a later component of a rod mill was purchased by ACC-Vickers-Babcock Limited and exported to India. Original Falk caption reads, "... |
Date: | 10 28 1968 |
---|---|
Description: | Large commercial gear that was purchased by ACC-Vickers-Babcock Limited and exported to India. Original Falk caption reads, "215 inch OD x 29 inch face rin... |
Date: | 10 29 1968 |
---|---|
Description: | Mill drive purchased by Allis Chalmers and used by Duval. Original Falk caption reads, "260 inch x 34 inch single helical split ring gear... part of a phot... |
Date: | 11 20 1968 |
---|---|
Description: | Gear coupling that was later purchased by Mesta Machine and used by Republic Steel. Original Falk caption reads, "84 inch hot strip mill, 300 G sleeve bein... |
If you didn't find the material you searched for, our Library Reference Staff can help.
Call our reference desk at 608-264-6535 or email us at: