Date: | 1946 |
---|---|
Description: | Workers chipping imperfections from a rough casting. |
Date: | 11 04 1935 |
---|---|
Description: | Worker pours molten metal into a mold for a TracTracTor (crawler tractor) main frame at International Harvester's Milwaukee Works foundry. |
Date: | 1914 |
---|---|
Description: | Three workers pouring molten metal into small containers at International Harvester's Milwaukee Works. The factory was owned by the Milwaukee Harvester Com... |
Date: | 1920 |
---|---|
Description: | Worker forming the tip of a steel rod at International Harvester Milwaukee Works. The factory was owned by the Milwaukee Harvester Company until 1902. |
Date: | 1916 |
---|---|
Description: | Two workers pouring molten metal from a crane-held vat into a mold to make castings at International Harvester's Milwaukee Works. The factory was owned by ... |
Date: | 06 15 1936 |
---|---|
Description: | Two workers loading large steel castings into the back of an International C-15 truck outside a Wehr Steel Company building. |
Date: | 1914 |
---|---|
Description: | A worker prepares to stamp a heated metal rod at International Harvester's Milwaukee Works (factory). |
Date: | 11 04 1937 |
---|---|
Description: | Two factory workers pour molten metal into diesel engine crankcase forms at the Milwaukee Works foundry. Photograph taken by Don Jones. |
Date: | 03 13 1957 |
---|---|
Description: | Described by the orginial Falk caption with "91 teeth, .77039 DP, 12 inch Face Meshes with 15 tooth pinion. Gear is shown on Drawing 317096 and Pinion on 2... |
Date: | 06 06 1958 |
---|---|
Description: | A male employee stands next to a large shipping shield. This shield was purchased by Stearns-Rogers and used by Westinghouse. Original Falk caption reads, ... |
Date: | 11 21 1958 |
---|---|
Description: | Two men inspect a large gear which was later purchased by DeLaval Steam Turbine Company of Trenton, New Jersey. Original Falk caption reads, "This gear is ... |
Date: | 01 16 1959 |
---|---|
Description: | Two men guide cement blocks that comprise a casting for a gear that will be used in a cement kiln. The final gear was later purchased by F.L. Smidth and Co... |
Date: | 02 14 1961 |
---|---|
Description: | Two men crouch atop of the large gear, while another stands at the side overseeing the lift. This gear was purchased and used by the Ladish Company of Cuda... |
Date: | 05 1965 |
---|---|
Description: | Pinions that were purchased by U.S. Steel (Allegheny Project) and used by Gary Steel Works. Male employee in photograph is R. Ponto. |
Date: | 07 18 1966 |
---|---|
Description: | Propeller of the S.S. Santa Cruz. Falk caption reads, "Photos taken for reference in study of propeller reversing characteristics for SUN Marine red... |
Date: | 09 15 1966 |
---|---|
Description: | Falk caption reads, "Photos of ring gear to be displayed at the Association of Iron and Steel Engineers (AISE) show in Cleveland, Ohio, September 26th thro... |
Date: | 02 22 1967 |
---|---|
Description: | Walking dragline that was later purchased by Marion Power Shovel Company. Falk caption reads, "130 yard power dragline propel crank. Pattern 261C17. Castin... |
Date: | 08 15 1967 |
---|---|
Description: | A roll on/roll off freighter is shown and was later purchased by Sun Shipbuilding. Falk caption reads, "Half strut for 646 single screw-roll on/roll off fr... |
Date: | 12 13 1967 |
---|---|
Description: | Single helical gear purchased by The Fuller Company and later used in Jamaica (as a rotary kiln). Falk caption reads, "Single helical gear, 260 teeth 99667... |
Date: | 01 24 1968 |
---|---|
Description: | This maxipress purchased by The National Machinery Company. Falk caption reads, "6000 ton maxipress, 23-120T .7854DP (4 inch CP), 16 inch face. Gear: alloy... |
If you didn't find the material you searched for, our Library Reference Staff can help.
Call our reference desk at 608-264-6535 or email us at: