Date: | 06 20 1966 |
---|---|
Description: | Falk caption reads, "A series of photos showing delivery of the first shipment of Radicon units direct from England to the port of Milwaukee. The series EG... |
Date: | 09 01 1973 |
---|---|
Description: | View of a 200T10 coupling. Falk caption reads, "Photo taken for possible use in T10 service manual. Photos show proper installation procedure." |
Date: | 06 1978 |
---|---|
Description: | Original Falk caption reads, "A series of photos to illustrate various manufacturing operations for future publications: Also color for slide talks." Male ... |
Date: | 07 08 1972 |
---|---|
Description: | Coupling that was purchased by Western Bearing of Sparks, Nevada and used by The Anaconda Company of Yerington, Nevada. Male employee in photograph is Glor... |
Date: | 03 13 1974 |
---|---|
Description: | View of a gear test at Falk that is done to "show parallel alignment of hubs with unequal diameters."- according to original Falk caption. |
Date: | 07 1975 |
---|---|
Description: | Male employee, Harold Ladwig, in the Weld Shop. Original Falk caption reads, "A series of pictures taken in Weld shop to illustrate steps in the manufactur... |
Date: | 07 1975 |
---|---|
Description: | A male employee, Harold Ladwig, welds an area on a worm gear. Original Falk caption reads, "A series of pictures taken in Weld Shop to illustrate steps in ... |
Date: | 01 15 1975 |
---|---|
Description: | Male employee, Jake Gemmel, attending to a FT coupling. Original Falk caption reads, "These pictures taken to illustrate FT coupling size... this is the la... |
Date: | 01 30 1928 |
---|---|
Description: | A group of men and women are looking at a giant cream separator on display in an exhibition hall. |
Date: | 01 06 1969 |
---|---|
Description: | Original Falk caption reads, "General view of the pattern shop taken as part of Allis Chalmers-Duval." Photo series for Bill Wyse. The core box in the fore... |
Date: | 01 30 1928 |
---|---|
Description: | A group of men are standing on the left looking up at a giant cream separator on display in an exhibition hall. |
Date: | 05 1965 |
---|---|
Description: | Manufactured in the Rolling Mill, these couplings were purchased by U.S. Steel (Allegheny Project) and used by Gary Steel Works. The male employee is H. De... |
Date: | 12 30 1966 |
---|---|
Description: | The 220 G20 gear coupling pictured was later purchased by L.W. Nash Company. Falk caption reads, "220 G20 Gear Coupling per assembly, Drawing number 418288... |
Date: | 10 21 1968 |
---|---|
Description: | These couplings were later purchased by Mesta Machine and used by Republic Steel. Falk caption reads, "These photos [were] taken to illustrate various size... |
Date: | 10 29 1968 |
---|---|
Description: | Mill drive purchased by Allis Chalmers and used by Duval. Original Falk caption reads, "260 inch x 34 inch single helical split ring gear... part of a phot... |
Date: | 05 1965 |
---|---|
Description: | Couplings that were purchased by U.S. Steel (Allegheny Project) and used by Gary Steel Works. The man in the photograph is D. Ferch. There is also a man wo... |
Date: | 01 29 1968 |
---|---|
Description: | Coupling that was purchased and used by Sociedad Mixta Siderugia, a steel mill in Argentina. Falk caption reads, "This 240G coupling is largest Falk gear c... |
Date: | 11 20 1968 |
---|---|
Description: | Gear coupling that was later purchased by Mesta Machine and used by Republic Steel. Original Falk caption reads, "84 inch hot strip mill, 300 G sleeve bein... |
Date: | 08 24 1971 |
---|---|
Description: | Tramway that was used by O.D. Hopkins Association Incorporated of Contoocook, New Hampshire. Falk caption reads, "Tramway (Skylark- customers, Sky Glider) ... |
Date: | 05 1979 |
---|---|
Description: | Original Falk caption reads, "General run of the mine large ring gears in various stages of manufacture waiting for subsequent machining operations. This s... |
If you didn't find the material you searched for, our Library Reference Staff can help.
Call our reference desk at 608-264-6535 or email us at: