Date: | 10 28 1968 |
---|---|
Description: | Large commercial gear that was purchased by ACC-Vickers-Babcock Limited and exported to India. Original Falk caption reads, "215 inch OD x 29 inch face rin... |
Date: | 10 29 1968 |
---|---|
Description: | Mill drive purchased by Allis Chalmers and used by Duval. Original Falk caption reads, "260 inch x 34 inch single helical split ring gear... part of a phot... |
Date: | 10 31 1968 |
---|---|
Description: | Original Falk caption reads, "Radial drilling on large split ring gear..." part of a photo and slide series for Engineering. Male employee in photograph is... |
Date: | 11 25 1968 |
---|---|
Description: | A 4 pinion BOF drive that was purchased by Pennsylvania Engineering and used by Youngstown Sheet and Tube. Original Falk caption reads, "4 pinion BOF, shaf... |
Date: | 11 06 1968 |
---|---|
Description: | Various G couplings that were purchased by Mesta Machine Company and used by Republic Steel Company. Original Falk caption reads, "Various sizes of gear co... |
Date: | 11 25 1968 |
---|---|
Description: | Dry dock hoist drive that is a component of a Pearlson Syncrolift. This product was later purchased by Pearlson Engineering. Original Falk caption reads, "... |
Date: | 01 06 1969 |
---|---|
Description: | Original Falk caption reads, "General view of the pattern shop taken as part of Allis Chalmers-Duval." Photo series for Bill Wyse. The core box in the fore... |
Date: | 01 02 1969 |
---|---|
Description: | Original Falk caption reads, "25G sleeve internal teeth being machined on Fellows machine number 7347 in Shop 4." Man in photograph is Henry Lemmermann." |
Date: | 05 07 1969 |
---|---|
Description: | This product was purchased by General Motors-Electro Motive Division and used by Litton Industries as a Great Lakes Ore Carrier. Falk caption reads, "Port ... |
Date: | 06 16 1969 |
---|---|
Description: | View of a cam that is a component of a 185 cubic yard Walkray Dragline that was purchased and used by Bucyries-Erie Company. An individual cam weight 51,20... |
Date: | 07 25 1969 |
---|---|
Description: | High speed gear unit that acts as a component in a gas turbine test-stand drive. This product was purchased and used by the Allison Division of the General... |
Date: | 07 23 1969 |
---|---|
Description: | Two Falk employees, Walt Drobkia on the right and Norb Winski on the left, attend to a planetary gear drive that is a component of a centrifuge. This produ... |
Date: | 08 22 1969 |
---|---|
Description: | A male employee, Chet Nycz, attends to an output shaft that was purchased by the Road Machine Division of American Hoist and Derrick Company and used by Vi... |
Date: | 08 22 1969 |
---|---|
Description: | Planetary gear drive that was used as a later component in a centrifuge. This product was purchased by Combustion Engineering Incorporated and used by Blac... |
Date: | 08 22 1969 |
---|---|
Description: | Speed reducer that is a component of a paper mill drive. This product was purchased by Black Clawson-Kennedy Limited and used by Consolidated Bathurst Limi... |
Date: | 10 02 1969 |
---|---|
Description: | Original Falk caption reads, "Views of bevel gear inspection equipment for future use-a product quality control publication." Man in photograph is Rob Scha... |
Date: | 10 17 1969 |
---|---|
Description: | This product was later purchased by Fuller Company (Traylor Engineering and Manufacturing). Falk caption reads, "Estimated rough weight 46,720 pounds. Flan... |
Date: | 11 20 1969 |
---|---|
Description: | Outlet trunnion that was a component for an outlet head on a cement mill. This product was purchased by F.L. Smidth and Company and then shipped to Mexico ... |
Date: | 05 11 1970 |
---|---|
Description: | This product, which is a later component of a sugar mill, was purchased bu Colorado Fuel and Iron and used by Union Sugar Division of Consolidated Foods Co... |
Date: | 05 20 1970 |
---|---|
Description: | A male employee, Karl Johns, attends to a sound test. |
If you didn't find the material you searched for, our Library Reference Staff can help.
Call our reference desk at 608-264-6535 or email us at: