Search the Wisconsin Historical Society's collections

Searching for

Refine by

Results 1-20 of 107

Photograph

P&H Type "O" Bridge with a Type "G" Trolley

Date: 04 18 1913
Description: View near crane operator looking down on coal car near exterior of building. Pawling & Harnischfeger type "O" bridge crane with a type "G" trolley in a fou...
Photograph

Foundry Operations at Tractor Works

Date: 07 29 1936
Description: Workers pouring alloy into a stream of iron in the foundry of International Harvester's Tractor Works. The factory was located at 2600 West 1st Blvd.
Photograph

Osborne Works Foundry Room

Date: 1913
Description: Men standing among molds in a section of the malleable foundry at International Harvester's Osborne Works. The factory was owned by the D.M. Osborne Compan...
Photograph

Workers Pouring Molten Metal at International Harvester's Milwaukee Works

Date: 1914
Description: Three workers pouring molten metal into small containers at International Harvester's Milwaukee Works. The factory was owned by the Milwaukee Harvester Com...
Photograph

Worker Forms Steel Rod at International Harvester's Milwaukee Works

Date: 1920
Description: Worker forming the tip of a steel rod at International Harvester Milwaukee Works. The factory was owned by the Milwaukee Harvester Company until 1902.
Photograph

Deering Works Machine Shop

Date: 05 20 1911
Description: Two workers in the "drop hammer malleable foundry" at International Harvester's Deering Works. The factory was owned by the Deering Harvester Company befor...
Photograph

Workers Pour Molten Metal into Molds at Milwaukee Works

Date: 1916
Description: Two workers pouring molten metal from a crane-held vat into a mold to make castings at International Harvester's Milwaukee Works. The factory was owned by ...
Photograph

Metal Finishing Room at McCormick Reaper Works

Date: 1900
Description: Workers in the metal finishing room at the McCormick Reaper Works. In 1902 the factory became part of the International Harvester Company.
Photograph

Worker Unloads Steel Beams from International D-300 Truck

Date: 1941
Description: Worker unloading steel beams from the back of an International D-300 truck at night. The truck was owned by Beals-McCarthy & Rogers Co., a wholesale hardwa...
Photograph

Man Working with Metal at Workbench

Date: 01 18 1921
Description: A man wearing overalls shaping a piece of metal at a workbench. A variety of hand tools are on the bench and the wall. The man is likely working at Interna...
Photograph

Man Operating Drill Press

Date: 1944
Description: Man operating a drill press at Madison-Kipp Corporation, 201 Waubesa Street, producing war materiel during World War II.
Photograph

Worker Heats Metal at Milwaukee Works

Date: 1914
Description: A worker prepares to stamp a heated metal rod at International Harvester's Milwaukee Works (factory).
Photograph

Men at Forge at McCormick Works

Date: 1900
Description: Men working with hot metal in what appears to be a forge at the McCormick Reaper Works factory.
Photograph

Factory Worker at Chattanooga Works

Date: 1930
Description: Factory worker using a press at the Chattanooga Plow Works.
Photograph

Chattanooga Plow Works Foundry

Date: 1930
Description: Factory worker in a foundry at the Chattanooga Plow Works fills a cart with hot metal. A blurred image of another worker that passed through the scene whil...
Photograph

Chattanooga Plow Works

Date: 1930
Description: Factory workers in a foundry at the Chattanooga Plow Works.
Photograph

Chattanooga Plow Company Factory

Date: 1930
Description: Factory workers around a blast furnace in a foundry at the Chattanooga Plow Works.
Photograph

Workers at Chattanooga Plow Works

Date: 1930
Description: Factory workers at the Chattanooga Plow Works.
Photograph

Milwaukee Works Foundry

Date: 11 04 1937
Description: Two factory workers pour molten metal into diesel engine crankcase forms at the Milwaukee Works foundry. Photograph taken by Don Jones.
Photograph

Man with Drive Pinion and Gear

Date: 03 13 1957
Description: Described by the orginial Falk caption with "91 teeth, .77039 DP, 12 inch Face Meshes with 15 tooth pinion. Gear is shown on Drawing 317096 and Pinion on 2...

Have Questions?

If you didn't find the material you searched for, our Library Reference Staff can help.

Call our reference desk at 608-264-6535 or email us at: