Date: | |
---|---|
Description: | Plate Steel Spiral Casing for 70,000 horse-power Niagara Falls hydraulic turbine unit at the Allis-Chalmers Manufacturing Company erecting shop. The castin... |
Date: | 12 20 1947 |
---|---|
Description: | Members of Local 1114, United Steelworkers of America (Harnischfeger Corporation) at a holiday costume party. |
Date: | 11 08 1947 |
---|---|
Description: | Prize winners at a costume dance sponsored by Local 1114, United Steelworkers of America (Harnischfeger Corporation). |
Date: | 11 04 1935 |
---|---|
Description: | Worker pours molten metal into a mold for a TracTracTor (crawler tractor) main frame at International Harvester's Milwaukee Works foundry. |
Date: | 1914 |
---|---|
Description: | Three workers pouring molten metal into small containers at International Harvester's Milwaukee Works. The factory was owned by the Milwaukee Harvester Com... |
Date: | 1920 |
---|---|
Description: | Worker forming the tip of a steel rod at International Harvester Milwaukee Works. The factory was owned by the Milwaukee Harvester Company until 1902. |
Date: | 1916 |
---|---|
Description: | Two workers pouring molten metal from a crane-held vat into a mold to make castings at International Harvester's Milwaukee Works. The factory was owned by ... |
Date: | 06 15 1936 |
---|---|
Description: | Two workers loading large steel castings into the back of an International C-15 truck outside a Wehr Steel Company building. |
Date: | 11 27 1967 |
---|---|
Description: | A machinist running a punch press at Res Manufacturing Company. |
Date: | 1914 |
---|---|
Description: | A worker prepares to stamp a heated metal rod at International Harvester's Milwaukee Works (factory). |
Date: | 11 04 1937 |
---|---|
Description: | Two factory workers pour molten metal into diesel engine crankcase forms at the Milwaukee Works foundry. Photograph taken by Don Jones. |
Date: | 12 07 1955 |
---|---|
Description: | A worker welds together sections of a press slide that was later purchased by Federal Engineering and used by the automotive industry. |
Date: | 03 03 1956 |
---|---|
Description: | Two long-time Falk employees, Bob Quitzow and Frank Ruscitti, work in the gas cutting department. Original Falk caption reads: "View of 'Bug' cutting Depar... |
Date: | 04 14 1956 |
---|---|
Description: | View of the manufacturing process of vacuum chucks. Used for skin milling, this particular order, according to an original Falk caption, "covers four dupli... |
Date: | 04 14 1956 |
---|---|
Description: | Two men simultaneously weld. According to an original Falk caption, "rough weight. 72000 pound est.-Unit was rough machine to with [sic]. 1/4 inch o... |
Date: | 04 14 1956 |
---|---|
Description: | View of the manufacturing process of vacuum chucks. Used for skin milling, this particular order, according to an original Falk caption, "covers four dupli... |
Date: | 09 04 1956 |
---|---|
Description: | A view looking west of several workers in the Heat Treating Department of the Falk Corporation. |
Date: | 08 24 1956 |
---|---|
Description: | Purchased by Allis Chalmers and used by the Marquette Cement Company, original Falk caption reads:"M.O. NO. 5541-0574 & 5520-7424. Type of Unit, 12 1/2 GDA... |
Date: | 02 14 1957 |
---|---|
Description: | A male employee stands near a screw press washer. The speed reducer shown is a Right Angle, Double Red. Later purchased and used by the American Boxboard C... |
If you didn't find the material you searched for, our Library Reference Staff can help.
Call our reference desk at 608-264-6535 or email us at: