Date: | 09 27 1974 |
---|---|
Description: | View of machinery castings that were a later component of a cement mill support roller. This unit was purchased by the Fuller Company and and used by Huron... |
Date: | 07 1975 |
---|---|
Description: | A male employee, Harold Ladwig, welds an area on a worm gear. Original Falk caption reads, "A series of pictures taken in Weld Shop to illustrate steps in ... |
Date: | 07 1975 |
---|---|
Description: | Male employee, Harold Ladwig, in the Weld Shop. Original Falk caption reads, "A series of pictures taken in Weld shop to illustrate steps in the manufactur... |
Date: | 01 15 1975 |
---|---|
Description: | Male employee, Jake Gemmel, attending to a FT coupling. Original Falk caption reads, "These pictures taken to illustrate FT coupling size... this is the la... |
Date: | 11 1976 |
---|---|
Description: | Two Falk employees, Arthur Hirt on the left, and Karl Becker on the right, attend to a large gear. This particular unit was purchased and used by United St... |
Date: | 01 26 1977 |
---|---|
Description: | A Falk employee, George Cira, inspects the components of a later ejection box. This unit was purchased by Central Foundry, a division of the General Motors... |
Date: | 03 1977 |
---|---|
Description: | This particular unit was purchased by Allis Chalmers and used by the Cleveland Cliffs Iron Company of the Tilden II Mine. |
Date: | 06 1977 |
---|---|
Description: | A male employee, Michael Nycz, attends to a pulverizer mill that is a later component of a coal pulverizer. This unit was purchased by Foster Wheeler and u... |
Date: | 06 06 1977 |
---|---|
Description: | Tim Wollenziehr, a Falk employee drives a fork-lift carrying an inching drive, a later component of a coal pulverizer. This unit was purchased by Babcock a... |
Date: | 07 1977 |
---|---|
Description: | Norbert Winski, a Falk employee, attends to a large vertical roller mill. This unit was purchased by the Fuller Company and used by the Gresik Cement Compa... |
Date: | 1978 |
---|---|
Description: | Lynnette Hartwig, a Falk employee, inspects a gear. This unit was later purchased by the Wisconsin Bearing Company. Original Falk caption reads: "Illustrat... |
Date: | 02 20 1978 |
---|---|
Description: | Anotha Burt, a Falk employee, inspects a large walk gear. This particular gear was purchased by Page Engineering. Original Falk caption reads, "Large walk ... |
Date: | 03 03 1978 |
---|---|
Description: | Art Hirt, a Falk employee, inspects a large mixer drive. This unit was purchased by the Mixing Equipment Company. Original Falk caption reads, "Picture tak... |
Date: | 03 1979 |
---|---|
Description: | James Blaesius, a Falk employee, operates a fork-lift that carries a component of a conveyor drive. This unit was purchased by Kaisers Engineers and used b... |
Date: | 06 1978 |
---|---|
Description: | Original Falk caption reads, "A series of photos to illustrate various manufacturing operations for future publications: Also color for slide talks." Male ... |
Date: | 07 31 1978 |
---|---|
Description: | Theodore A. Lutzen, a Falk employee, guides a pipe cap as it is being lowered. This unit was purchased by Vulcan Iron Works. Original Falk caption reads, "... |
Date: | 10 24 1978 |
---|---|
Description: | Gerald Gosetti, a Falk employee, inspects a large vertical roller mill. This particular mill was purchased by combustion engineering and used by Marquette ... |
Date: | 11 06 1978 |
---|---|
Description: | Melvin Zdroik, a Falk employee, attends to a large vertical roller mill that is a later component of a L.S. Shaft and Gear. This unit was purchased by Comb... |
Date: | 11 29 1978 |
---|---|
Description: | Melvin E. Rew attends to a large flange for a mill head. This unit was purchased by Humbolt Wedag and used by Kaiser. |
Date: | 04 25 1979 |
---|---|
Description: | A large single helical ring gear hangs from the ceiling in the Falk factory. This later component of a kiln drive was purchased by Allis Chalmers and used ... |
If you didn't find the material you searched for, our Library Reference Staff can help.
Call our reference desk at 608-264-6535 or email us at: