Date: | 03 28 1974 |
---|---|
Description: | Original Falk caption reads, "This photo taken to illustrate pre-heating a large coupling hub by torch prior to making a shrink-fit mounting on a shaft." M... |
Date: | 05 22 1974 |
---|---|
Description: | Original Falk caption reads, "These pictures taken to illustrate a procedure to allow saving and reusing Tivela lube during service or repair operations on... |
Date: | 06 28 1974 |
---|---|
Description: | Reverse drive that was purchased by Delaval Turbine and used by Bulk Food Carrier. Falk caption reads, "Largest of the "MR" type design made to date. Wides... |
Date: | 03 31 1905 |
---|---|
Description: | An unidentified Falk employee stands next to a large Steel Spur Gear. The sign in the photograph reads: "Cast Steel Spur Gear. Made by The Falk Co. Milwauk... |
Date: | 07 15 1974 |
---|---|
Description: | Gear coupling that was purchased by A.G McKee and Company and used by Fior De Venezuela of South America. Falk caption reads, "Iron ore briquette roll driv... |
Date: | 08 19 1974 |
---|---|
Description: | This unit was purchased and used by Armstrong Rubber Company. Original Falk caption reads, "Design horsepower-3143; service horsepower-1500; service factor... |
Date: | 12 20 1943 |
---|---|
Description: | Men working in the sheet metal shop of the farm machinery engineering department of the International Harvester Company. The original caption reads: "Part ... |
Date: | 08 19 1974 |
---|---|
Description: | This unit was purchased and used by Armstrong Rubber Company. Original Falk caption reads, "Design horsepower-3143; service horsepower-1500; service factor... |
Date: | 08 31 1974 |
---|---|
Description: | Twin pinion marine red gear that was used by The Offshore Company for the Discoverer 534, a deep ocean drilling rig. Original Falk caption reads, "Propulsi... |
Date: | 09 27 1974 |
---|---|
Description: | View of machinery castings that were a later component of a cement mill support roller. This unit was purchased by the Fuller Company and and used by Huron... |
Date: | 07 1975 |
---|---|
Description: | A male employee, Harold Ladwig, welds an area on a worm gear. Original Falk caption reads, "A series of pictures taken in Weld Shop to illustrate steps in ... |
Date: | 07 1975 |
---|---|
Description: | Male employee, Harold Ladwig, in the Weld Shop. Original Falk caption reads, "A series of pictures taken in Weld shop to illustrate steps in the manufactur... |
Date: | 01 15 1975 |
---|---|
Description: | Male employee, Jake Gemmel, attending to a FT coupling. Original Falk caption reads, "These pictures taken to illustrate FT coupling size... this is the la... |
Date: | 11 1976 |
---|---|
Description: | Two Falk employees, Arthur Hirt on the left, and Karl Becker on the right, attend to a large gear. This particular unit was purchased and used by United St... |
Date: | 01 26 1977 |
---|---|
Description: | A Falk employee, George Cira, inspects the components of a later ejection box. This unit was purchased by Central Foundry, a division of the General Motors... |
Date: | 03 1977 |
---|---|
Description: | This particular unit was purchased by Allis Chalmers and used by the Cleveland Cliffs Iron Company of the Tilden II Mine. |
Date: | 06 1977 |
---|---|
Description: | A male employee, Michael Nycz, attends to a pulverizer mill that is a later component of a coal pulverizer. This unit was purchased by Foster Wheeler and u... |
Date: | 06 06 1977 |
---|---|
Description: | Tim Wollenziehr, a Falk employee drives a fork-lift carrying an inching drive, a later component of a coal pulverizer. This unit was purchased by Babcock a... |
Date: | 07 1977 |
---|---|
Description: | Norbert Winski, a Falk employee, attends to a large vertical roller mill. This unit was purchased by the Fuller Company and used by the Gresik Cement Compa... |
Date: | 1978 |
---|---|
Description: | Lynnette Hartwig, a Falk employee, inspects a gear. This unit was later purchased by the Wisconsin Bearing Company. Original Falk caption reads: "Illustrat... |
If you didn't find the material you searched for, our Library Reference Staff can help.
Call our reference desk at 608-264-6535 or email us at: