Search the Wisconsin Historical Society's collections
Filter: Categories of Wisconsin Historical Images
Filter: Subject of Indoor photography
Filter: Subject of technology
Filter: Subject of models and modelmaking
| Date: | 07 08 1945 |
|---|---|
| Description: | August Carsten, a builder of one of the few roll-away model trains and villages in the country, is shown at the main control of the electric operated model... |
| Date: | 1946 |
|---|---|
| Description: | Three young men in uniform, most likely boy scouts, standing with a model airplane. The men are being filmed for television at the Iowa State Fair. |
| Date: | 06 1964 |
|---|---|
| Description: | Paul Blaugh posing with the underwater electric engines that pulled boats on model river for Minirama. |
| Date: | 07 01 1935 |
|---|---|
| Description: | A six-can McCormick-Deering Milk Cooler on display in an International Harvester dealership. A display case on the left near a window holds either toys or... |
| Date: | 1932 |
|---|---|
| Description: | A miniature model of an International truck rests on its side, showing the undercarriage. The model was likely built by Norman Scott of Winnipeg, Manitoba. |
| Date: | 10 16 1941 |
|---|---|
| Description: | View of a 1/4 size International Harvester truck rendered in clay on a wood frame. The model was likely made by an industrial designer. |
| Date: | 1951 |
|---|---|
| Description: | Side view of a full-size rendering of an International truck in clay. The model is located inside a garage or studio space. The model was likely made by a... |
| Date: | |
|---|---|
| Description: | Scale model of an experimental truck "flip cab" shown in an open position. The model was likely produced by an industrial designer. |
| Date: | 1966 |
|---|---|
| Description: | Two aspiring industrial designers work to create a clay model of a "Multipurpose Safety Utility Vehicle" during the first styling seminar at the Fort Wayne... |
| Date: | 1966 |
|---|---|
| Description: | A man, possibly sculptor Howard Hastings, leans over a clay model of a "Multipurpose Safety Utility Vehicle" during the first styling seminar at the Fort W... |
| Date: | 1966 |
|---|---|
| Description: | A man, possibly sculptor Howard Hastings, watches as an International Harvester professional sculpts a clay model of a "Multipurpose Safety Utility Vehicle... |
| Date: | 1966 |
|---|---|
| Description: | Two men kneel before clay models of a "Multipurpose Safety Utility Vehicle" set on a table during the first styling seminar at the Fort Wayne motor truck e... |
| Date: | 1966 |
|---|---|
| Description: | Men stand beside a model of a "Multipurpose Safety Utility Vehicle" while another man sits inside during the first styling seminar at the Fort Wayne motor ... |
| Date: | 1966 |
|---|---|
| Description: | A man constructs a space buck on a divider during International Harvester's first styling seminar at the Fort Wayne motor truck engineering department. The... |
| Date: | 1966 |
|---|---|
| Description: | Jack Willer (left) stands in front of John Hutton (seated) to discuss the design of a "Multipurpose Safety Utility Vehicle" at International Harvester's fi... |
| Date: | 08 1985 |
|---|---|
| Description: | "Arnold Hartmann, Mayville, displays a 1/3 scale model Fuller & Johnson gas engine. The engine was machined by Arnie in his elaborate machine shop." |
| Date: | 10 28 1958 |
|---|---|
| Description: | Ted Meloy (second from right), drive chairman, stands at a podium while informing the group that they have obtained over half their goal. Listening, left t... |
| Date: | 1962 |
|---|---|
| Description: | Newton Minow (left) and three men of the Senate Commerce Communications Subcommittee look at a model of the Telstar satellite. |
| Date: | 1962 |
|---|---|
| Description: | A group of men look at a model of the Telstar with Newton Minow. |
| Date: | 1962 |
|---|---|
| Description: | Newton Minow and another man look at a model of the Telstar satellite. |
If you didn't find the material you searched for, our Library Reference Staff can help.
Call our reference desk at 608-264-6535 or email us at: