Date: | 05 25 1938 |
---|---|
Description: | Visitors examining machinery displays in International Harvester's touring diesel engine exhibit. |
Date: | 12 20 1943 |
---|---|
Description: | Jack Gordon uses a tool to shape a clay model truck in the truck engineering department. The original caption reads: "Truck stylist Jack Gordon works on a ... |
Date: | 12 20 1943 |
---|---|
Description: | Louis Graves uses a door-window regulator test machine in the truck engineering department. The original caption reads: "This door-window regulator test ma... |
Date: | 1935 |
---|---|
Description: | John Seltzer (left) and T.C. Phillips examine a blueprint in the Engineering Department of International Harvester's Fort Wayne Works. |
Date: | 1932 |
---|---|
Description: | A miniature model of an International truck rests on its side, showing the undercarriage. The model was likely built by Norman Scott of Winnipeg, Manitoba. |
Date: | 10 16 1941 |
---|---|
Description: | View of a 1/4 size International Harvester truck rendered in clay on a wood frame. The model was likely made by an industrial designer. |
Date: | 1951 |
---|---|
Description: | Side view of a full-size rendering of an International truck in clay. The model is located inside a garage or studio space. The model was likely made by a... |
Date: | |
---|---|
Description: | Scale model of an experimental truck "flip cab" shown in an open position. The model was likely produced by an industrial designer. |
Date: | |
---|---|
Description: | A man working on a truck engine in the opened compartment of an experimental "flip cab." The text in the upper left corner reads: "Proposed COE [cab-over-e... |
Date: | 1973 |
---|---|
Description: | Elevated rear view of International prototype WUT (World Utility Vehicle) with exposed bed frame, revealing its simple and easy-to-build design. |
Date: | 1973 |
---|---|
Description: | Side view of International prototype WUT (World Utility Vehicle) with exposed bed frame revealing its simple and easy-to-build design. |
Date: | 1966 |
---|---|
Description: | Two aspiring industrial designers work to create a clay model of a "Multipurpose Safety Utility Vehicle" during the first styling seminar at the Fort Wayne... |
Date: | 1966 |
---|---|
Description: | A man, possibly sculptor Howard Hastings, leans over a clay model of a "Multipurpose Safety Utility Vehicle" during the first styling seminar at the Fort W... |
Date: | 1966 |
---|---|
Description: | Two men kneel before clay models of a "Multipurpose Safety Utility Vehicle" set on a table during the first styling seminar at the Fort Wayne motor truck e... |
Date: | 1966 |
---|---|
Description: | Men stand beside a model of a "Multipurpose Safety Utility Vehicle" while another man sits inside during the first styling seminar at the Fort Wayne motor ... |
Date: | 1966 |
---|---|
Description: | International Harvester engineer Ted Ornas with a group of students at the company's first styling seminar at the Fort Wayne motor truck engineering depart... |
Date: | 1966 |
---|---|
Description: | IH engineer Ted Ornas and a student discuss the building of a "Multipurpose Safety Utility Vehicle" during International Harvester's first styling seminar ... |
Date: | 1966 |
---|---|
Description: | IH engineer Ted Ornas consults with a student at International Harvester's first styling seminar at the Fort Wayne motor truck engineering department. The ... |
Date: | 1966 |
---|---|
Description: | IH engineer Ted Ornas consults with a student in International Harvester's first styling seminar at the Fort Wayne motor truck engineering department. The ... |
Date: | 09 20 1939 |
---|---|
Description: | Loewy rendering of D-40, front view. Original folder reads: "1939- D-40 & D-70 proposals by Loewy." 9/22/1939 Negative number ST-6293. |
If you didn't find the material you searched for, our Library Reference Staff can help.
Call our reference desk at 608-264-6535 or email us at: