Date: | 1932 |
---|---|
Description: | A miniature model of an International truck rests on its side, showing the undercarriage. The model was likely built by Norman Scott of Winnipeg, Manitoba. |
Date: | 10 16 1941 |
---|---|
Description: | View of a 1/4 size International Harvester truck rendered in clay on a wood frame. The model was likely made by an industrial designer. |
Date: | 1951 |
---|---|
Description: | Side view of a full-size rendering of an International truck in clay. The model is located inside a garage or studio space. The model was likely made by a... |
Date: | |
---|---|
Description: | Scale model of an experimental truck "flip cab" shown in an open position. The model was likely produced by an industrial designer. |
Date: | 1966 |
---|---|
Description: | Two aspiring industrial designers work to create a clay model of a "Multipurpose Safety Utility Vehicle" during the first styling seminar at the Fort Wayne... |
Date: | 1966 |
---|---|
Description: | A man, possibly sculptor Howard Hastings, leans over a clay model of a "Multipurpose Safety Utility Vehicle" during the first styling seminar at the Fort W... |
Date: | 1966 |
---|---|
Description: | A man, possibly sculptor Howard Hastings, watches as an International Harvester professional sculpts a clay model of a "Multipurpose Safety Utility Vehicle... |
Date: | 1966 |
---|---|
Description: | Two men kneel before clay models of a "Multipurpose Safety Utility Vehicle" set on a table during the first styling seminar at the Fort Wayne motor truck e... |
Date: | 1966 |
---|---|
Description: | Men stand beside a model of a "Multipurpose Safety Utility Vehicle" while another man sits inside during the first styling seminar at the Fort Wayne motor ... |
Date: | 1966 |
---|---|
Description: | A man constructs a space buck on a divider during International Harvester's first styling seminar at the Fort Wayne motor truck engineering department. The... |
Date: | 1966 |
---|---|
Description: | Jack Willer (left) stands in front of John Hutton (seated) to discuss the design of a "Multipurpose Safety Utility Vehicle" at International Harvester's fi... |
Date: | 1970 |
---|---|
Description: | Two men, both clay modelers, start work on proposal for 1970 F4370 TranStar. They are adding clay to a wood frame in rough design, in order to achieve the ... |
Date: | 1936 |
---|---|
Description: | Styling study of front end for proposed 1937 D-Line 1/2 ton truck, clay mock-up. The final design for production changed from this with different headlight... |
Date: | 1936 |
---|---|
Description: | Styling study of proposed 1937 D-30 1 1/2 ton in clay. |
Date: | 1936 |
---|---|
Description: | Clay mock-up of front end of D-30 for 1937 model year. Left front view, note wood frame for fenders. |
Date: | 1936 |
---|---|
Description: | Clay mock-up of front end for 1937 D-30 1 1/2 ton. |
Date: | 1936 |
---|---|
Description: | Clay mock-up of 1937 front end for D-30 1 1/2 ton. |
Date: | 1936 |
---|---|
Description: | Clay mock-up of front end of D-30 1 1/2 ton. |
Date: | 1936 |
---|---|
Description: | Clay mock-up of 1937 front end for D-30 1 1/2 ton. |
Date: | 1936 |
---|---|
Description: | Front end view of a clay mock-up styling study for a 1937 D-30 1 1/2 ton. |
If you didn't find the material you searched for, our Library Reference Staff can help.
Call our reference desk at 608-264-6535 or email us at: