Date: | 09 16 1968 |
---|---|
Description: | A cement mill drive that was manufactured in the Speed Reducer Department of the Falk Corporation. This drive was later purchased by Fuller Company and use... |
Date: | 05 1968 |
---|---|
Description: | Bull gear for a large shaft mounted BOF drive. Falk caption reads, "Finish cutting on Schiess hobber in Shop 4. Male employee in photograph is Erv Schneide... |
Date: | 10 21 1968 |
---|---|
Description: | These couplings were later purchased by Mesta Machine and used by Republic Steel. Falk caption reads, "These photos [were] taken to illustrate various size... |
Date: | 09 31 1968 |
---|---|
Description: | Split ring gear that is a component of a rod mill that was purchased by ACC-Vickers-Babcock Limited and then exported to India. Falk caption reads, "215 in... |
Date: | 10 31 1968 |
---|---|
Description: | Split ring gear that was a later component of a rod mill was purchased by ACC-Vickers-Babcock Limited and exported to India. Original Falk caption reads, "... |
Date: | 10 28 1968 |
---|---|
Description: | Large commercial gear that was purchased by ACC-Vickers-Babcock Limited and exported to India. Original Falk caption reads, "215 inch OD x 29 inch face rin... |
Date: | 10 29 1968 |
---|---|
Description: | Mill drive purchased by Allis Chalmers and used by Duval. Original Falk caption reads, "260 inch x 34 inch single helical split ring gear... part of a phot... |
Date: | 10 31 1968 |
---|---|
Description: | Original Falk caption reads, "Radial drilling on large split ring gear..." part of a photo and slide series for Engineering. Male employee in photograph is... |
Date: | 11 25 1968 |
---|---|
Description: | A 4 pinion BOF drive that was purchased by Pennsylvania Engineering and used by Youngstown Sheet and Tube. Original Falk caption reads, "4 pinion BOF, shaf... |
Date: | 11 06 1968 |
---|---|
Description: | Various G couplings that were purchased by Mesta Machine Company and used by Republic Steel Company. Original Falk caption reads, "Various sizes of gear co... |
Date: | 11 20 1968 |
---|---|
Description: | Gear coupling that was later purchased by Mesta Machine and used by Republic Steel. Original Falk caption reads, "84 inch hot strip mill, 300 G sleeve bein... |
Date: | 11 25 1968 |
---|---|
Description: | Dry dock hoist drive that is a component of a Pearlson Syncrolift. This product was later purchased by Pearlson Engineering. Original Falk caption reads, "... |
Date: | 01 06 1969 |
---|---|
Description: | Original Falk caption reads, "General view of the pattern shop taken as part of Allis Chalmers-Duval." Photo series for Bill Wyse. The core box in the fore... |
Date: | 01 02 1969 |
---|---|
Description: | Original Falk caption reads, "25G sleeve internal teeth being machined on Fellows machine number 7347 in Shop 4." Man in photograph is Henry Lemmermann." |
Date: | 05 07 1969 |
---|---|
Description: | This product was purchased by General Motors-Electro Motive Division and used by Litton Industries as a Great Lakes Ore Carrier. Falk caption reads, "Port ... |
Date: | 06 16 1969 |
---|---|
Description: | View of a cam that is a component of a 185 cubic yard Walkray Dragline that was purchased and used by Bucyries-Erie Company. An individual cam weight 51,20... |
Date: | |
---|---|
Description: | Factory worker operating a "Hannifin quenching press" at International Harvester's Milwaukee Works. |
Date: | 05 23 1973 |
---|---|
Description: | Two employees, Bob Weiss and Clyde Tetzloff, attend to a drive that was purchased by Babcock and Wilcox Company and used by AEP Service Corporation. Falk c... |
Date: | 03 31 1905 |
---|---|
Description: | An unidentified Falk employee stands next to a large Steel Spur Gear. The sign in the photograph reads: "Cast Steel Spur Gear. Made by The Falk Co. Milwauk... |
Date: | 06 06 1977 |
---|---|
Description: | Tim Wollenziehr, a Falk employee drives a fork-lift carrying an inching drive, a later component of a coal pulverizer. This unit was purchased by Babcock a... |
If you didn't find the material you searched for, our Library Reference Staff can help.
Call our reference desk at 608-264-6535 or email us at: