Date: | 12 20 1943 |
---|---|
Description: | Jack Gordon uses a tool to shape a clay model truck in the truck engineering department. The original caption reads: "Truck stylist Jack Gordon works on a ... |
Date: | 12 20 1943 |
---|---|
Description: | Louis Graves uses a door-window regulator test machine in the truck engineering department. The original caption reads: "This door-window regulator test ma... |
Date: | 12 20 1943 |
---|---|
Description: | Jerry Moreland tests a front drive joint assembly in a freezing cabinet at the International Harvester truck engineering department. The original caption r... |
Date: | 1932 |
---|---|
Description: | A miniature model of an International truck rests on its side, showing the undercarriage. The model was likely built by Norman Scott of Winnipeg, Manitoba. |
Date: | 1941 |
---|---|
Description: | An International M-5-6 truck on a test drive along a concrete track with deep depressions at the Fort Wayne Proving Grounds. The original caption reads, "I... |
Date: | 1973 |
---|---|
Description: | Sketch of International prototype WUT (World Utility Vehicle). |
Date: | 1966 |
---|---|
Description: | A man, possibly sculptor Howard Hastings, leans over a clay model of a "Multipurpose Safety Utility Vehicle" during the first styling seminar at the Fort W... |
Date: | 1966 |
---|---|
Description: | Two men kneel before clay models of a "Multipurpose Safety Utility Vehicle" set on a table during the first styling seminar at the Fort Wayne motor truck e... |
Date: | 1966 |
---|---|
Description: | Men stand beside a model of a "Multipurpose Safety Utility Vehicle" while another man sits inside during the first styling seminar at the Fort Wayne motor ... |
Date: | 1966 |
---|---|
Description: | Students converse with a International Harvester engineer Ted Ornas during the first styling seminar at the Fort Wayne motor truck engineering department. ... |
Date: | 1966 |
---|---|
Description: | International Harvester engineer Ted Ornas with a group of students at the company's first styling seminar at the Fort Wayne motor truck engineering depart... |
Date: | 1966 |
---|---|
Description: | IH engineer Ted Ornas and a student discuss the building of a "Multipurpose Safety Utility Vehicle" during International Harvester's first styling seminar ... |
Date: | 1966 |
---|---|
Description: | A man constructs a space buck on a divider during International Harvester's first styling seminar at the Fort Wayne motor truck engineering department. The... |
Date: | 1966 |
---|---|
Description: | IH engineer Ted Ornas consults with a student at International Harvester's first styling seminar at the Fort Wayne motor truck engineering department. The ... |
Date: | 1966 |
---|---|
Description: | IH engineer Ted Ornas consults with a student in International Harvester's first styling seminar at the Fort Wayne motor truck engineering department. The ... |
Date: | 1966 |
---|---|
Description: | IH engineer Ted Ornas consults with a student in International Harvester's first styling seminar at the Fort Wayne motor truck engineering department. Anot... |
Date: | 1966 |
---|---|
Description: | Jack Willer (left) stands in front of John Hutton (seated) to discuss the design of a "Multipurpose Safety Utility Vehicle" at International Harvester's fi... |
Date: | 03 1954 |
---|---|
Description: | Page from International Sales Engineering Bulletin Number 130, featuring the R-140 truck. |
Date: | 09 20 1939 |
---|---|
Description: | Direct front view of a 1939 D-40, design by Loewy. Original folder reads: "1939 D-40 & D-70 proposals by Loewy." 9/22/1939 negative number ST-6288. |
Date: | 09 22 1939 |
---|---|
Description: | Three-quarter view from front of a 1939 D-40 design by Loewy. Original folder reads "1939 D-40 & D-70 proposals by Loewy." 9-22-39 negative number ST-6290. |
If you didn't find the material you searched for, our Library Reference Staff can help.
Call our reference desk at 608-264-6535 or email us at: